Ac quick hitch?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=153381
Printed Date: 08 Jun 2025 at 1:28pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Ac quick hitch?
Posted By: Nathan
Subject: Ac quick hitch?
Date Posted: 26 Aug 2018 at 2:56pm
|
Did ac ever make a quick hitch for 3 point? Thanks nathan ------------- 35WC 37WC D-10 D-12 D-14 D-15 D-17series 1 (2)D-17IV D-19 CA RC Unstyled WF GLEANER E 416H 314H 712H 716H |
Replies:
Posted By: AMB(wcIL)
Date Posted: 26 Aug 2018 at 3:30pm
| Yes, 3 different styles that I have seen. All made out of round pipe. Some have D21 cast into the upper hook. Andy |
Posted By: Mike Kroupa
Date Posted: 26 Aug 2018 at 9:43pm
| The one that I have seen on a 8550 was Cat. 3W and was all welded square iron/tubing construction. It shows it in the parts book. The one that I have is the three piece round pipe type and is Cat.3N. Mike |
Posted By: LB0442
Date Posted: 27 Aug 2018 at 9:43am
Here is one that came with my 7080. Never really looked at it too close but it does have a D21 cast in it? I think it is way newer than a D21 tractor.  |
Posted By: Brian F(IL)
Date Posted: 27 Aug 2018 at 11:02am
|
I looked in my Dad's 1981 price list for a quick hitch for the 7000 series tractors. I can't find it listed as an accessory for any of the two wheel drive tractors, although the "options" are limited in the tractor pages. However, for the four-wheel drive 7580 it references an option of "heavy duty 3-point hitch, Category III with Quick Hitch" as an option for $3,786. Wow! The "heavy duty" part must have been something special (as opposed to just being a bare-back tractor). However, I've only got the price lists for the tractors. There was a "tab" in his 3-ring binder labeled "Tractor Accessories" but unfortunately all that information is gone.
 |
Posted By: Daehler
Date Posted: 27 Aug 2018 at 9:19pm
|
I have a category 3/4 its a square tubed one, i bet it weighs 7 to 800 pounds. Also have one thats like pictured above. ------------- 8070FWA,7080 BlackBelly, 7045,2 200s,D19,D17,G, WD,45,UC,7 AC mowers and lots more! "IT TAKES 3 JD's TO OUT DO AN ALLIS, 2 TO MATCH IT IN THE FIELD AND 1 FOR PARTS!" |