615 Loader PIN needed.
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=106028
Printed Date: 07 Sep 2025 at 10:50am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 615 Loader PIN needed.
Posted By: Dean (West MI)
Subject: 615 Loader PIN needed.
Date Posted: 11 May 2015 at 9:47pm
|
I'm missing number 6, any idea where I could find one? Any idea what type of steel they used?  |
Replies:
Posted By: Dozer
Date Posted: 12 May 2015 at 5:11pm
|
If the pin is an exact fractional size use 1040 TGP. If you do not have a steel supplier near you can buy short lengths on eBay. Find a person selling steel on eBay and "ask a question" if they can supply what you need. Alternately find a local machine shop. Look at a similar pin on your machine if it is not badly worn the type of steel is not critical. |
Posted By: Coke-in-MN
Date Posted: 12 May 2015 at 6:20pm
|
Looks like that pin is a SHAFT running across loader frame to each side of loader arms . It evidently is a structural part of loader frame and transfers stress . I would not worry so much about type of steel used but of bushings and fastening type used . ------------- Life lesson: If you’re being chased by a lion, you’re on a horse, to the left of you is a giraffe and on the right is a unicorn, what do you do? You stop drinking and get off the carousel. |