This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
653 Dozer reverse issue |
Post Reply |
Author | |
floorman
Bronze Level Joined: 20 Oct 2012 Location: Arkansas Points: 3 |
Post Options
Thanks(0)
Posted: 20 Oct 2012 at 1:22am |
I have a 653 Dozer from the mid 70's that will not reverse. Previously it would not reverse if it was nose down, but if I would lift the body level with the blade it would reverse. Now it will not. I cannot find anyone local to work on this issue, or provide any suggestion for repair. The engine has been rebuilt recently. I have manuals, but they skim over the transmission.
Any clues?
|
|
Sponsored Links | |
orangeman
Orange Level Joined: 12 Sep 2009 Points: 1688 |
Post Options
Thanks(0)
|
Check to make sure your fluid levels are full in the transmission and torque converter.
|
|
Coke-in-MN
Orange Level Access Joined: 12 Sep 2009 Location: Afton MN Points: 41217 |
Post Options
Thanks(1)
|
Hyd Clutch pack . check fluid levels is first idea.
My HD4 lost reverse while running it and found it had broken spring in the shuttle valve where the control would not slide into position to allow oil to reverse side of clutch pack. new spring and it worked again. I had fwd and neutral but rev just quit while backing out of excavation. .
|
|
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful." |
|
floorman
Bronze Level Joined: 20 Oct 2012 Location: Arkansas Points: 3 |
Post Options
Thanks(0)
|
Thanks. Fluids are good and been changed. Will check spring.
|
|
Coke-in-MN
Orange Level Access Joined: 12 Sep 2009 Location: Afton MN Points: 41217 |
Post Options
Thanks(1)
|
In the manual there should be some thing s on hyd pressure and which lines feed what , I also believe there is a listing of where pressure reading can be taken . These are in the shop service manuals.
Should be a filter in that system also - believe it is mounted in front of engine area small can shaped fixture as it is high pressure filter .
|
|
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful." |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |