Ford edge brakes

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hey guys wondering if you've ever run into something like i did this weekend.  

2013 ford edge. Brakes worked great right at first but if you held them say your at a stop sign they would steadily sink to the floor and the brake holding power would go away. 

Must be a bad master cylinder.  Removed it which was a chore on its own.  Got new master and bench bleed it with block off plugs where the lines would go. Put it together and absolutely no brakes at all.  Dad comes to help and he suggested to bleed the master the old school ways with lines going from the ports back into the resvoir. Put it all together and still nothing.  

Crack the lines loose at the master and use my power bleeder. Seems good.  Went around to each wheel and power bled them.  Still nothing.  Had dad in the car pumped it up 3 times cracked each master cylinder line. No help.

Dad asked about the abs.  So we did a power bleed of that using a scan tool. We then finished the night with the pump 3 times hold and I Crack the line. 

None of this helped.  I have no brakes at all. What could I have done wrong.  I stared with a vehicle that I would be comfy going 80 in and stopping.  I wouldn't have felt comfy depending on then holding after an extended period time of holding the pedal but at least it was drivable. I'm at the point I wouldn't take this over 2 miles per hour. 

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
bobkyllo Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 14 Sep 2009 Location: minnesota Points: 1576	Post Options Post Reply Quote bobkyllo Report Post Thanks(0) Quote Reply Topic: Ford edge brakes Posted: 1 hour 24 minutes ago at 3:04am
	Hey guys wondering if you've ever run into something like i did this weekend. 2013 ford edge. Brakes worked great right at first but if you held them say your at a stop sign they would steadily sink to the floor and the brake holding power would go away. Must be a bad master cylinder. Removed it which was a chore on its own. Got new master and bench bleed it with block off plugs where the lines would go. Put it together and absolutely no brakes at all. Dad comes to help and he suggested to bleed the master the old school ways with lines going from the ports back into the resvoir. Put it all together and still nothing. Crack the lines loose at the master and use my power bleeder. Seems good. Went around to each wheel and power bled them. Still nothing. Had dad in the car pumped it up 3 times cracked each master cylinder line. No help. Dad asked about the abs. So we did a power bleed of that using a scan tool. We then finished the night with the pump 3 times hold and I Crack the line. None of this helped. I have no brakes at all. What could I have done wrong. I stared with a vehicle that I would be comfy going 80 in and stopping. I wouldn't have felt comfy depending on then holding after an extended period time of holding the pedal but at least it was drivable. I'm at the point I wouldn't take this over 2 miles per hour.

Sponsored Links