| Author |
 Topic Search  Topic Options
|
GregLawlerMinn 
Orange Level
Joined: 11 Sep 2009
Location: Lawler, Mn
Points: 1226
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: D17D Engine Rework Update
Posted: 07 Jul 2010 at 7:35pm |
|
Followup on my previous post. The D17D is blowing smoke again!!! New Piston/Sleeve in #4 hole and rebuilt head. Sounds as pretty as it did before the #4 intake vale seat fell out and destroyed the piston, intake valve, and sleeve. Time for it to start to earn it's keep; haaying season is here and it will be running a round baler for the next several weeks.
|
|
What this country needs is more unemployed politicians-and lawyers.
Currently have: 1 D14 and a D15S2.
With new owners: 2Bs,9CAs,1WD,2 D12s,5D14s,3D15S2s, 2D17SIVs,D17D,1D19D;1 Unstyled WC
|
 |
|
Sponsored Links
|
|
|
Hurst
Orange Level
Joined: 11 Sep 2009
Location: Midway, Ky
Points: 1201
|
Post Options
Thanks(0)
Quote Reply
Posted: 07 Jul 2010 at 7:54pm |
|
What color smoke is it blowing?
|
|
1979 Allis Chalmers 7000
5800 Hours
|
|
GregLawlerMinn
Orange Level
Joined: 11 Sep 2009
Location: Lawler, Mn
Points: 1226
|
Post Options
Thanks(0)
Quote Reply
Posted: 07 Jul 2010 at 8:04pm |
|
It's blowing clear; except when it's throttled up, or pulling, then it blows some black out the stack.
|
|
What this country needs is more unemployed politicians-and lawyers.
Currently have: 1 D14 and a D15S2.
With new owners: 2Bs,9CAs,1WD,2 D12s,5D14s,3D15S2s, 2D17SIVs,D17D,1D19D;1 Unstyled WC
|
|
Brian Jasper co. Ia
Orange Level
Joined: 11 Sep 2009
Location: Prairie City Ia
Points: 10508
|
Post Options
Thanks(0)
Quote Reply
Posted: 07 Jul 2010 at 9:40pm |
Did you have the pump off while you fixed #4? (pump timing) Don't happen to have a dirty air filter do you? Did you check the cam? My series 1 diesel had 2 lobes that were more than half worn off. It always smoked a little until it had just enough load to warm up.
|
|
"Any man who thinks he can be happy and prosperous by letting the government take care of him better take a closer look at the American Indian." Henry Ford
|
|
GregLawlerMinn
Orange Level
Joined: 11 Sep 2009
Location: Lawler, Mn
Points: 1226
|
Post Options
Thanks(0)
Quote Reply
Posted: 08 Jul 2010 at 8:22am |
Did not remove the injector pump. Removed front end, oil pan, inj lines/injectors at the head, and removed the head. Removed rod bolts, pushed # 4 piston out, pulled sleeve, cleaned up the hole/O-ring grooves and reinstalled new sleeve and piston. After re-assembling the engine, I primed the fuel pump (removed the bleeder screw on top of the fuel filters) and left the injector nuts a little loose. Turned engine over and when saw fuel leaking from most of the inj nuts; tightened them up and it started within 5 turns of the engine. It runs real good and the rain cap stays level at idle; don't suspect worn cam lobes. I am looking for a new thermostat for it as the engine does not warm up (gage works when set the sensor end between exh manifold and intake water manifold.
Sorry, no dirty air filters; it has an Oil-Bath air cleaner, and has one of the earliest diesel engines in the Series I line.
|
|
What this country needs is more unemployed politicians-and lawyers.
Currently have: 1 D14 and a D15S2.
With new owners: 2Bs,9CAs,1WD,2 D12s,5D14s,3D15S2s, 2D17SIVs,D17D,1D19D;1 Unstyled WC
|
|
