| Author |
 Topic Search  Topic Options
|
Tiger Joe 
Bronze Level
Joined: 12 Aug 2012
Location: Pittsburgh
Points: 37
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: need a turbo for HD7GB
Posted: 20 May 2013 at 9:05am |
anyone know where I could find a good used turbo or parts to rebuild the one on my dads machine?
1972 HD7GB has the 3500 series engine (turbo 6 cylinder)
turbo has a tag on it says "317 Thompson turbocharger"
|
 |
|
Sponsored Links
|
|
|
injpumpEd
Orange Level Access
Joined: 13 Sep 2009
Location: Walnut IL
Points: 5080
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 May 2013 at 11:52am |
|
pm me with #'s. I can get you one.
|
|
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
|
Tiger Joe
Bronze Level
Joined: 12 Aug 2012
Location: Pittsburgh
Points: 37
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 May 2013 at 8:16pm |
|
ok i might have found one local, will PM you if not
|
|
DMiller
Orange Level Access
Joined: 14 Sep 2009
Location: Hermann, Mo
Points: 33520
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 May 2013 at 8:03am |
|
One caution on checking turbos, they will have side play in the rotors and shaft as the bushings are usually free floating, that is they ride in a bath of oil on both sides of the bushing. The seals are generally ceramic and spring loaded so they maintain contact during heat up and don't tighten up when cooled down. Play can be apparent but may not be an issue.
Unless you can see hard visual as to rotor vane contact with the housing the side movement is probably normal, the worst issues for turbochargers is loss of balance and turbine rotor vane wear or erosion.
|
|
Dozer
Orange Level
Joined: 16 Aug 2011
Location: SW New York
Points: 689
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 May 2013 at 10:24am |
|
There are several turbo's that will fit on the Allis Chalmers motors. The important thing about turbo's is the trim. Turbo's are made with interchangable turbine and compressor parts. There are several turbo's on eBay sold by turbo shops for less than $200. When you purchase an official AC turbo it is much more than the prices on eBay. I suggest that you contact one of the eBay turbo shops. They could rebuild your existing turbo or build a turbo to the AC specifications. Note that the turbo's made for automobiles are specifically for that car. The industrial turbo's ( for your application ) are generic but they are trimmed for the application. If a turbo shop didn't have the AC spec they could put a turbo together knowing the cubic inch (516 cu in), the rpm range and the boost. If the turbo on my 7000 motor is typical the boost is positive but small.
|
|
Tiger Joe
Bronze Level
Joined: 12 Aug 2012
Location: Pittsburgh
Points: 37
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 May 2013 at 10:33am |
|
my dad talked to the local turbo shop that we found. They said $800 to rebuild it, or $650 to buy an already rebuilt one.
|
|
edwin
Bronze Level
Joined: 06 Apr 2013
Location: lebanon mo
Points: 49
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 May 2013 at 7:54pm |
|
hey fellow 7gb owner.do u know anyone familiar with 7gb trans. any help,would be appreciated. thanks.
|
|
