| Author |
 Topic Search  Topic Options
|
starstepper020 
Bronze Level
Joined: 26 Oct 2011
Location: new york
Points: 4
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: drawbar for a allis CA
Posted: 16 Feb 2012 at 3:49pm |
|
have an1952 Allis Chalmers CA Looking for a drawbar--- not sure what it need -- there is a woods L59 belly mower on it. looks like a b drawbar would work but it has to be much wider than a B, their is a mounting pin under the tractor just in front of the rear axles. Looks like a C shaped drawbar which fastens to final drive would work if allis made one , Any help would be appreacated Thanks Phone 315 668 9804
|
 |
|
Sponsored Links
|
|
|
CTuckerNWIL
Orange Level
Joined: 11 Sep 2009
Location: NW Illinois
Points: 22824
|
Post Options
Thanks(0)
Quote Reply
Posted: 16 Feb 2012 at 4:42pm |
|
The pin hitch drawbar attaches to the pin under the belly and to the lift arms when they are in the vertical position. You could probably bolt a C drawbar to it but the mower would have to be off. I have had the Woods mower on my CA with the pin hitch drawbr in place after altering the Woods brackets. Sorry I don't have a pic right now. Charlie
|
|
|
|
starstepper020
Bronze Level
Joined: 26 Oct 2011
Location: new york
Points: 4
|
Post Options
Thanks(0)
Quote Reply
Posted: 16 Feb 2012 at 5:06pm |
thanks for your input, have a great evening
|
|
Glockhead SWMI
Orange Level
Joined: 12 Sep 2009
Location: South West Mich
Points: 2657
|
Post Options
Thanks(0)
Quote Reply
Posted: 16 Feb 2012 at 5:24pm |
|
a c drawbar bolts on and works good.
|
|
Leon B MO
Orange Level
Joined: 12 Sep 2009
Location: Old Monroe, Mo
Points: 2181
|
Post Options
Thanks(0)
Quote Reply
Posted: 16 Feb 2012 at 6:27pm |
|
|
|
Uncle always said "Fill the back of the shovel and the front will take care of itself".
|
|
Leon B MO
Orange Level
Joined: 12 Sep 2009
Location: Old Monroe, Mo
Points: 2181
|
Post Options
Thanks(0)
Quote Reply
Posted: 16 Feb 2012 at 6:31pm |
Forgot to add my text. This is how I put a hitch on my CA. My factory drawbar would have been in the way for the belt. So I welded two small peices of angle iron to the cross pipe then two pieces to a reciever and just bolted to tractor crossbar. I can use any hitch that I have for my truck, ball, riser, lower, or pin.
Leon B MO
|
|
Uncle always said "Fill the back of the shovel and the front will take care of itself".
|
|
Dick L
Orange Level
Joined: 12 Sep 2009
Location: Edon Ohio
Points: 5087
|
Post Options
Thanks(0)
Quote Reply
Posted: 16 Feb 2012 at 6:36pm |
You can use the C drawbar with a woods mower.
|
|
norm[ind]
Orange Level
Joined: 29 Oct 2010
Location: bourbon,ind
Points: 2992
|
Post Options
Thanks(0)
Quote Reply
Posted: 16 Feb 2012 at 7:42pm |
|
we havve a C DRAWBAR if needed 1-800-254-3116
|
|
Dakota Dave
Orange Level
Joined: 12 Sep 2009
Location: ND
Points: 3969
|
Post Options
Thanks(0)
Quote Reply
Posted: 16 Feb 2012 at 8:07pm |
you can use either a CA pin hitch drawbar or a C drawbar with the woods mower mount without any modification. I have one of each they both work fine. My CA also has a loader mounted at the same time. I take the loader arms and rams off during the summer when the mower deck is on.
|
|
CTuckerNWIL
Orange Level
Joined: 11 Sep 2009
Location: NW Illinois
Points: 22824
|
Post Options
Thanks(1)
Quote Reply
Posted: 16 Feb 2012 at 8:13pm |
 Dakota Dave wrote:
you can use either a CA pin hitch drawbar or a C drawbar with the woods mower mount without any modification. I have one of each they both work fine. My CA also has a loader mounted at the same time. I take the loader arms and rams off during the summer when the mower deck is on. |
I have the universal mount tube like Dicks, works on a B,C or CA. The pin hitch drawbar will not fit unless it is lowered. There are different mounts and maybe one like Leon has would work with the pin hitch drawbar.
|
|
|
|
Steve(SEMN)
Orange Level
Joined: 12 Sep 2009
Location: Rochester, MN
Points: 836
|
Post Options
Thanks(1)
Quote Reply
Posted: 16 Feb 2012 at 8:38pm |
|
We have a non snapcoupler wd drawbar on our CA that is bolted around the horizontal iron piece. Sticks out a bit more but is nice to use as a step to get on tractor. It had to be modified a bit at the front anchor point.
Edited by Steve(SEMN) - 16 Feb 2012 at 8:45pm
|
|
