| Author |
 Topic Search  Topic Options
|
Sagar 
Silver Level
Joined: 20 Feb 2011
Location: PA
Points: 52
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: Rust Removal
Posted: 02 Mar 2011 at 6:34pm |
Hey guys,
While I have been waiting for good weather and time to pull the tractor from the woods, I have removed the carb from the tractor just to have something to work on. I need to break everything loose and get things moving on it. I tried brake fluid and didn't have enough to completely submerge it, I also spray PB blaster on it to see if that helps. Then the container got left outside in the rain so any fluid turned to mud. So I started from scratch and I heard Coca Cola helps with this type of thing so for the past day I've had it soaking in Coke. Is there anything else I should have tried or should try next? I have access to a sand blaster so once I get it free and moving I will sand blast it and then rebuild it. Since I have never done anything like this am I on the right track as to how to approach handling the various parts of the tractor?
Thanks
Sagar
|
 |
|
Sponsored Links
|
|
|
Walker
Orange Level Access
Joined: 12 Sep 2009
Location: oh
Points: 8998
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Mar 2011 at 6:47pm |
|
They sell magical cans of stuff called carburetor cleaner. Oddly enough it works really well for cleaning carburetors.
|
|
MNLonnie
Orange Level
Joined: 11 Sep 2009
Location: Baxter MN
Points: 4791
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Mar 2011 at 6:53pm |
|
Gunk Carb-Medic. It's the only way. Comes in a gallon can and has 3 quarts of solution in it along with a small basket. Put the large parts in the can and the small parts in the basket and submerge it for 15-20 minutes, pull it out and knock off any big chunks then do it again. The parts come out very clean, it eats gaskets and anything elae off it and doesn't take long. Runs about $25 and use it over and over.
|
|
Waukesha B, B, IB, G, styled WF, D15, 615 backhoe, 2-Oliver OC3's, 4 Ford Model T's, 3 Model A Fords, AV8 Coupe, AV8 Roadster, 1933 Ford Wrecker
|
|
7060
Orange Level
Joined: 16 Sep 2009
Location: Missouri
Points: 1148
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Mar 2011 at 6:55pm |
Diesel fuel or gas either one work. Watch out for sparks though.
|
|
Sagar
Silver Level
Joined: 20 Feb 2011
Location: PA
Points: 52
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Mar 2011 at 6:59pm |
Regular carb cleaner isn't strong enough.
I will try the Gunk Carb Medic and/or fuel.
Thanks guys.
|
|
NickT(Ky)
Orange Level
Joined: 13 Sep 2009
Location: Elizabethtown,
Points: 417
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Mar 2011 at 7:29pm |
|
NAPA has the gallon can you submerge the carb parts in and works pretty good. Nick
|
|
ChuckLuedtkeSEWI
Orange Level
Joined: 11 Sep 2009
Location: Jackson, WI
Points: 1826
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Mar 2011 at 7:36pm |
|
I would be very careful if you plan on sandblasting it. I tried it once on a carb, and I got some media in the orifices and could never get the carb to work right after that. Lesson learned on my end. There was some talk on there about blasting carb with baking soda using an air nozzle and a vinyl hose. Supposed to work really well, and when you're done, if anything gets clogged in the orifices, you can just wash it and the baking soda will dissolve and wash out. I have yet to try it on one, but I got a D17 carb I picked up for a puller that I need to clean. Supposed to do it outside and it's like throwing a bag of powdered sugar around.
|
|
1955 WD45 diesel 203322 was my dad's tractor, 1966 D15 23530, 1961 HD3 Crawler 1918, 1966 D17 IV 83495, 1937 WC 41255, 1962 D19 6221
|
|
Stan IL&TN
Orange Level
Joined: 13 Sep 2009
Location: Elvis Land
Points: 6730
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Mar 2011 at 8:22pm |
|
Pine Sol straight out of the bottle. Let it soak a few days.
|
|
1957 WD45 dad's first AC
1968 one-seventy
1956 F40 Ferguson
|
|
Brad MI
Silver Level
Joined: 12 Sep 2009
Location: Arcadia MI
Points: 339
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Mar 2011 at 8:42pm |
|
Break it into the major components, use Carb Medic and then bead blast. Take it completely apart, then bead blast again so all the little passages get cleared out. Get the complete carb kit and rebuild. Better than new.
|
|
