7060 question

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hello, yesterday I noticed that although the tractor was in gear—and correctly set to the high range—it wouldn't move forward when I released the clutch. After a short wait, it finally engaged (the gearbox did grind when shifting into gear, so I don't suspect the clutch is the issue).

Furthermore, I notice this happening primarily when the tractor is positioned on a downward slope (nose pointing down); on one occasion, the hydraulic high-low even shifted into the low range on its own while driving downhill. Could this be caused by low oil levels in the "power director" (transmission/range unit), or is there another underlying cause?

During normal operation, I don't notice any issues, and the tractor has its usual power.

Thanks!

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Wot Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 16 Sep 2009 Location: N Points: 166	Post Options Post Reply Quote Wot Report Post Thanks(0) Quote Reply Topic: 7060 question Posted: 13 hours 45 minutes ago at 2:51am
	Hello, yesterday I noticed that although the tractor was in gear—and correctly set to the high range—it wouldn't move forward when I released the clutch. After a short wait, it finally engaged (the gearbox did grind when shifting into gear, so I don't suspect the clutch is the issue). Furthermore, I notice this happening primarily when the tractor is positioned on a downward slope (nose pointing down); on one occasion, the hydraulic high-low even shifted into the low range on its own while driving downhill. Could this be caused by low oil levels in the "power director" (transmission/range unit), or is there another underlying cause? During normal operation, I don't notice any issues, and the tractor has its usual power. Thanks!

Sponsored Links

Lynn Marshall Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 13 Sep 2009 Location: Dana, Iowa Points: 2560	Post Options Post Reply Quote Lynn Marshall Report Post Thanks(0) Quote Reply Posted: 6 hours 23 minutes ago at 10:13am
	Certain sounds like low oil in transmission. The transmission oil pressure light should have been on,if that is the case. Does the light even work?

8070nc Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 21 Mar 2019 Location: North Carolina Points: 934	Post Options Post Reply Quote 8070nc Report Post Thanks(0) Quote Reply Posted: 1 hour 12 minutes ago at 3:24pm
	By what you first described im wondering if your hi low cable on the range transmission is worn out stretched or out if adjustment. When it would not move then ground then fell into gear is not good. You need to know its fully egaged
	1984 80780 1957 D14 DES 300 with 25000 engine 616 tractor