![]() |
This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | |||||
| The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History | |
remote propane tank gauges |
Post Reply
|
| Author | |
Steve A
Silver Level
Joined: 12 Apr 2012 Location: NLP Mi Points: 268 |
Post Options
Thanks(0)
Quote Reply
Topic: remote propane tank gaugesPosted: 28 Jan 2026 at 2:02pm |
|
Any experience with them? Recommendation? Have a 500 gal LP tank at a house quite a few miles away. No internet connection there other than cell phone. I own the tank; Dad bought it long ago. I believe year of manufacture is 1985 or earlier, so obviously the gauge is not WIFI compatible or having any type of external wiring. I'd like to set it up with an external remote sensor/gauge I could read from my phone.
Thanks |
|
![]() |
|
| Sponsored Links | |
![]() |
|
Dirt Farmer
Silver Level Access
Joined: 15 Sep 2020 Location: Illinois Points: 457 |
Post Options
Thanks(0)
Quote Reply
Posted: 28 Jan 2026 at 3:44pm |
|
You might check with your fuel supplier, they would probably know of the most up to date products out there otherwise have the driver put you on their route and then when they are in the area they just top your tank off and one less thing you have to think about. That’s how we work with our supplier and when he hears there is a price increase in the works he gets to us before the increase or if the price is headed down he waits for that as well. We have been with the same company for over 50 years and have always been treated well
|
|
![]() |
|
steve(ill)
Orange Level Access
Joined: 11 Sep 2009 Location: illinois Points: 89883 |
Post Options
Thanks(0)
Quote Reply
Posted: 28 Jan 2026 at 4:01pm |
|
I have never ued one, but this sounds like a possibility... Might talk directly to them..
|
|
|
Like them all, but love the "B"s.
|
|
![]() |
|
Steve A
Silver Level
Joined: 12 Apr 2012 Location: NLP Mi Points: 268 |
Post Options
Thanks(0)
Quote Reply
Posted: 15 hours 6 minutes ago at 7:28pm |
|
Thanks for the replies. I did see that one on Amazon. This tank does not have remote ready R3 dial.
The propane services I've dealt with charge extra if the tank is not below 20 percent. Local term is a "Short load" and they tack on a much higher delivery fee. |
|
![]() |
|
Codger
Orange Level
Joined: 23 Dec 2020 Location: Utopia Points: 2537 |
Post Options
Thanks(0)
Quote Reply
Posted: 3 hours 1 minutes ago at 7:33am |
|
I've dealt with a lot of LP fuel suppliers throughout the midwest over the years when working. Citing you own the tank you are not limited to whom the fuel is purchased from. Most vendors I have dealt with had a minimum 100, or 150 gallon drop, and then there were no delivery charges. I didn't utilize vendors that did not have this option.
I used Hicks, Ferrel, FS, and several small "Mom & Pop" suppliers over the years for fuels and don't remember ever paying a delivery fee. Remote monitoring is a good feature to have. Used it for years but it was hard wired.
|
|
|
That's All Folks!
|
|
![]() |
|
DMiller
Orange Level Access
Joined: 14 Sep 2009 Location: Hermann, Mo Points: 35229 |
Post Options
Thanks(0)
Quote Reply
Posted: 2 hours 12 minutes ago at 8:22am |
|
Our home tank only supplies Range Cooktop and two grill connections, average refill every two years is 75-85 gal in a 125g Horizontal tank. Have considered a whole house 10-14kw LP Generator where would change that to at least a 500g tank, then replace the small tank we own altogether.
|
|
![]() |
|
Codger
Orange Level
Joined: 23 Dec 2020 Location: Utopia Points: 2537 |
Post Options
Thanks(0)
Quote Reply
Posted: 19 minutes ago at 10:15am |
|
I buried a 1000gl tank at the shop to be rid of the above ground tank. It is nice and out of sight except a slight riser above grade for filling, and service porting. To ensure the tank stayed below grade I poured runners formed with 2X12 lumber with screw in earth anchors 24" deep and 5/8" rebar welded to the anchor tops which is centered, and encased in a monolithic pour of concrete. I had also welded threaded studs to the rebar which protrude through holes in the storage tank legs and are fastened down with stainless washers and nylock nuts. The anchorage points are then encased with an electrical potting compound which is waterproof.
Basically any ground hydraulic pressure attempting to push this tank up will be against the two six foot runners and three screw in anchors in each runner at the same time.
|
|
|
That's All Folks!
|
|
![]() |
|
Post Reply
|
|
|
Tweet
|
| Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |