| Author |
 Topic Search  Topic Options
|
ForeverHomestead 
Bronze Level
Joined: 29 Sep 2016
Location: Ontario
Points: 22
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: PTO Seal
Posted: 17 Feb 2024 at 2:31pm |
|
I am rebuilding my D14 and while painting the transmission housing I see there is an oil seal in the front where the PTO shaft runs through to the torque housing. Both of these housing share the same hydrolic fluids for as long as I have had the tractor. My question is should I replace this seal and change the fluids back to transmission fluid in the transmission and hydrolic in the torque housing?
|
 |
|
Sponsored Links
|
|
|
SteveM C/IL
Orange Level Access
Joined: 12 Sep 2009
Location: Shelbyville IL
Points: 8678
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Feb 2024 at 3:06pm |
|
both compartments can run universal trans/hyd fluid
|
|
ForeverHomestead
Bronze Level
Joined: 29 Sep 2016
Location: Ontario
Points: 22
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Feb 2024 at 3:45pm |
|
So really no need to replace that seal?
|
|
Gary(VA)
Silver Level
Joined: 13 Sep 2009
Location: Troutville, VA
Points: 341
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Feb 2024 at 6:00pm |
|
There's three compartments on a D14, hydraulic up front, power director in the middle and transmission/rearend. Is the tractor split now? The fluids levels are different between the compartments I believe.
Edited by Gary(VA) - 17 Feb 2024 at 6:03pm
|
|
DSeries4
Orange Level
Joined: 12 Sep 2009
Location: Ontario, Canada
Points: 7533
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Feb 2024 at 9:41am |
|
They run the same fluid, but they are at different levels. If it is already apart, replace the seals on the PTO shaft and the transmission input shaft.
|
|
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
|
SteveM C/IL
Orange Level Access
Joined: 12 Sep 2009
Location: Shelbyville IL
Points: 8678
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Feb 2024 at 12:58pm |
|
Best answer is fix seals and fill compartments to proper levels. One and done but not the easiest. You have to decide if u want it fixed or patched.
|
|
ForeverHomestead
Bronze Level
Joined: 29 Sep 2016
Location: Ontario
Points: 22
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Feb 2024 at 4:07pm |
Thanks guys. That all makes sense. It is apart and now is the time. I have a few months into the project now. So what is pone more order for seal going to hurt. lol
I did think if there is a seal there must be a reason.
|
|
tbran
Orange Level
Joined: 14 Sep 2009
Location: Paris Tn
Points: 3539
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 Feb 2024 at 4:40pm |
|
Yes , if it has not been apart before you may find some old leather seals in the middle bottom where the back to back 70227679 seals are located. 70241779 is the rear seal and check the splines on the front of the PTO shaft for burrs. The trans input shaft seal is a pair of 70235847's and you should be all sealed up.
|
|
When told "it's not the money,it's the principle", remember, it's always the money..
|
|
