This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
12 HP Kohler Foot pounds |
Post Reply |
Author | |
GARY(OH/IN)
Orange Level Joined: 19 May 2010 Location: Findlay,Ohio Points: 917 |
Post Options
Thanks(0)
Posted: 03 Jul 2021 at 12:26pm |
My Simplicity 7112 engine has passed on. I'm looking at replacing with a Predator 8 or 13 HP engine. Wondering how many foot pounds of torque the Kohler 12 HP cast iron engine serial number 10182359 had. It will only be used for mowing. Any help is appreciated.
|
|
Sponsored Links | |
wjohn
Orange Level Joined: 19 Jan 2010 Location: KS Points: 1954 |
Post Options
Thanks(0)
|
When I looked before it's always had to find numbers on these. There are a few charts that were probably from a Kohler sales brochure floating around. This is the best one I can find quickly: https://www.ihcubcadet.com/attachments/264487-jpg.84721/
Some discussion on it here: https://www.ihcubcadet.com/threads/archive-through-november-06-2013.4620/ Looks like around 22 ft-lbs for a K301?
|
|
1939 B, 1940 B, 1941 WC, 1951 WD, 1952 CA, 1956 WD-45
|
|
steve(ill)
Orange Level Access Joined: 11 Sep 2009 Location: illinois Points: 80828 |
Post Options
Thanks(0)
|
HP = TORQUE x RPM / 5252
TORQUE = HP x 5252 / RPM Torque = 12 x 5252 / 3000 = 21 Ft pounds. it all depends on what the RPM rated is for TORQUE.. May not be the same RPM as max HP.
|
|
Like them all, but love the "B"s.
|
|
GARY(OH/IN)
Orange Level Joined: 19 May 2010 Location: Findlay,Ohio Points: 917 |
Post Options
Thanks(0)
|
Thanks to both of you for your info.
|
|
GARY(OH/IN)
Orange Level Joined: 19 May 2010 Location: Findlay,Ohio Points: 917 |
Post Options
Thanks(0)
|
Thanks to both of you for your input.
|
|
jaybmiller
Orange Level Access Joined: 12 Sep 2009 Location: Greensville,Ont Points: 22399 |
Post Options
Thanks(0)
|
if it burned as much oil as the one in my LGT125 did, probably not even close to 21 ftpds.....I replaced a 12HP Tecumseh (Sear St12) with a 9HP 'off shore Honda clone', and it has tons of power. Check shaft sizes ! somehwere in the HP range they change from 7/8 to 1". most snowblow engines are 7/8"...arrrgh.... |
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
|
Coke-in-MN
Orange Level Access Joined: 12 Sep 2009 Location: Afton MN Points: 41549 |
Post Options
Thanks(0)
|
Had a Kohler K341 - 16 HP on my New Holland S16 - replaced it with a Tecumseh 16 Hp which seemed to have more torque - ran that for about 8 years until it seized -
Replaced it with a 18 HP Honda engine and still runs good . The Predator engine is the Chinese knock off of Honda - but seem good as put a 6 HP on my tiller and has worked fine . On compactor replaced the Wisconsin Robbin engine with a Tecumseh but went through 2 engines as would not stand up to vibrations - Went with a Honda and it has run for over 6 years of use with no problems |
|
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful." |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |