HD6E starter motor

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   It has been a year since I posted about my starter motor troubles.  I rebuilt my   starter and starter solenoid.  I replaced the wire connecting the batteries with #2 welding cable.  I used #2 wire on my HD6G that has both batteries in the same battery box.  I got back to the HD6E and hooked up the wires to start it.  The left hand battery box smoked and the connecting wire came off the terminal end.  I replaced the wire checking that all connecting cables were tight.  I pressed the starter button again and the right battery box smoked melting the terminal connector.  I replaced the #2 cable with the #0 cable with the keyed battery disconnect under the seat.  I turned the key and the starter solenoid clicked without me pressing the starter button.  I turned the disconnect off but it didn't go off.  The battery cables got warm.  I loosened the terminal ends.  I could rotate them but I could not remove any of them.  I had to spread them with a screw driver because the heat reduced the battery terminal diameter.  I recharged the batteries and found the year old batteries could only hold 25% charge.  My $25 replacement battery disconnect came today.  Rating 200 Amp continuous 1000 Amp intermittent.  Hope it goes well when I try to start it tomorrow.

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Dozer987 Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 08 Aug 2023 Location: West Almond, NY Points: 32	Post Options Post Reply Quote Dozer987 Report Post Thanks(0) Quote Reply Topic: HD6E starter motor Posted: 1 hour 47 minutes ago at 5:11pm
	It has been a year since I posted about my starter motor troubles. I rebuilt my starter and starter solenoid. I replaced the wire connecting the batteries with #2 welding cable. I used #2 wire on my HD6G that has both batteries in the same battery box. I got back to the HD6E and hooked up the wires to start it. The left hand battery box smoked and the connecting wire came off the terminal end. I replaced the wire checking that all connecting cables were tight. I pressed the starter button again and the right battery box smoked melting the terminal connector. I replaced the #2 cable with the #0 cable with the keyed battery disconnect under the seat. I turned the key and the starter solenoid clicked without me pressing the starter button. I turned the disconnect off but it didn't go off. The battery cables got warm. I loosened the terminal ends. I could rotate them but I could not remove any of them. I had to spread them with a screw driver because the heat reduced the battery terminal diameter. I recharged the batteries and found the year old batteries could only hold 25% charge. My $25 replacement battery disconnect came today. Rating 200 Amp continuous 1000 Amp intermittent. Hope it goes well when I try to start it tomorrow.

Sponsored Links