First pull with the 7040.

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   It was a beautiful day. We took a 2 hour trip north to the Kennan, Wi pull. Tractor ran like a top until the 200 foot mark and either the limiter or the power shift started slipping. I’m going to split it again and most likely bolt limiter solid. I felt like my torque limiter rebuild went together really nicely, and it only took one brake stomp to “break it in” and it wouldn’t slip after that until the pull of course. I tested power shift pressures before I pulled. They were all around 210 psi. I am leaning towards the limiter slipping.. I did resurface the flywheel and pressure plate and installed a new four pad clutch with additional springs and spacers. I suspected it might not hold, but I thought I would at least get at least to the 250 mark with all new and compressed components.. at least it looked pretty. Anybody have any suggestions on how I narrow it down to the limiter or the power shift?  Back to splitsville I go😩

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Mattman Members Profile Send Private Message Find Members Posts Add to Buddy List Silver Level Joined: 20 Dec 2012 Location: Plover, WI Points: 230	Post Options Post Reply Quote Mattman Report Post Thanks(0) Quote Reply Topic: First pull with the 7040. Posted: 15 hours 56 minutes ago at 6:37pm
	It was a beautiful day. We took a 2 hour trip north to the Kennan, Wi pull. Tractor ran like a top until the 200 foot mark and either the limiter or the power shift started slipping. I’m going to split it again and most likely bolt limiter solid. I felt like my torque limiter rebuild went together really nicely, and it only took one brake stomp to “break it in” and it wouldn’t slip after that until the pull of course. I tested power shift pressures before I pulled. They were all around 210 psi. I am leaning towards the limiter slipping.. I did resurface the flywheel and pressure plate and installed a new four pad clutch with additional springs and spacers. I suspected it might not hold, but I thought I would at least get at least to the 250 mark with all new and compressed components.. at least it looked pretty. Anybody have any suggestions on how I narrow it down to the limiter or the power shift? Back to splitsville I go😩

Sponsored Links