This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
Followup on WD WD45 pistons |
Post Reply |
Author | |
Michael Crowe
Orange Level Joined: 11 Sep 2009 Location: Kansas City Points: 1722 |
Post Options
Thanks(0)
Posted: 20 Nov 2015 at 8:38pm |
I finally had a chance to get to the farm and take some pictures. I will post each engine kit or set of pistons in a separate post to minimize confusion.
This is a set of 4 WD 6.6:1 ratio pistons. Edited by Michael Crowe - 24 Jan 2018 at 3:11pm |
|
The 14th Annual Exclusive AC Swap Meet will be held in Boonville, MO, March 7-8, 2025. See the club website for details: http://www.moacclub.com/
|
|
Sponsored Links | |
Michael Crowe
Orange Level Joined: 11 Sep 2009 Location: Kansas City Points: 1722 |
Post Options
Thanks(0)
|
This is a set of 6.45:1 compression pistons for a WD45.
Edited by Michael Crowe - 24 Jan 2018 at 3:15pm |
|
The 14th Annual Exclusive AC Swap Meet will be held in Boonville, MO, March 7-8, 2025. See the club website for details: http://www.moacclub.com/
|
|
Michael Crowe
Orange Level Joined: 11 Sep 2009 Location: Kansas City Points: 1722 |
Post Options
Thanks(0)
|
This is a 5.5:1 compression piston for a WD.
I only have one of these; not sure where I got it. Edited by Michael Crowe - 24 Jan 2018 at 3:17pm |
|
The 14th Annual Exclusive AC Swap Meet will be held in Boonville, MO, March 7-8, 2025. See the club website for details: http://www.moacclub.com/
|
|
Michael Crowe
Orange Level Joined: 11 Sep 2009 Location: Kansas City Points: 1722 |
Post Options
Thanks(0)
|
This is an Engine Kit, 257454, this is a 5.7:1 compression ratio for a WD engine.
Edited by Michael Crowe - 24 Jan 2018 at 3:23pm |
|
The 14th Annual Exclusive AC Swap Meet will be held in Boonville, MO, March 7-8, 2025. See the club website for details: http://www.moacclub.com/
|
|
Michael Crowe
Orange Level Joined: 11 Sep 2009 Location: Kansas City Points: 1722 |
Post Options
Thanks(0)
|
This is an Engine Kit for a WD45 with 6.45:1 compression ratio pistions.
Edited by Michael Crowe - 24 Jan 2018 at 3:27pm |
|
The 14th Annual Exclusive AC Swap Meet will be held in Boonville, MO, March 7-8, 2025. See the club website for details: http://www.moacclub.com/
|
|
Michael Crowe
Orange Level Joined: 11 Sep 2009 Location: Kansas City Points: 1722 |
Post Options
Thanks(0)
|
This is an Engine Kit for a WD45 with 7.25:1 compression pistons.
Edited by Michael Crowe - 24 Jan 2018 at 3:30pm |
|
The 14th Annual Exclusive AC Swap Meet will be held in Boonville, MO, March 7-8, 2025. See the club website for details: http://www.moacclub.com/
|
|
Michael Crowe
Orange Level Joined: 11 Sep 2009 Location: Kansas City Points: 1722 |
Post Options
Thanks(0)
|
I have 3 WD45 6.45:1 engine kits and 1 WD 5.7:1 Engine Kit that I will sell. I also have 4 NOS 6.6:1 compression WD Pistons. All these kits and miscellaneous pistons are NOS. I also have a 4 NORS Sleeve Kits for a WD Distillate Engine.
Sorry to take so long fixing the above posts due to the Photobucket debacle. Please email or call me if you are interested. I rarely check PM's. mcrowefarm@gmail.com or 816 898 7277. Edited by Michael Crowe - 24 Jan 2018 at 3:35pm |
|
The 14th Annual Exclusive AC Swap Meet will be held in Boonville, MO, March 7-8, 2025. See the club website for details: http://www.moacclub.com/
|
|
Dmpaul89
Orange Level Joined: 06 Mar 2013 Location: Edwardsville,IL Points: 1689 |
Post Options
Thanks(0)
|
Im interested In a 7.25 kit ill contact tomorrow.
|
|
Brian G. NY
Orange Level Joined: 12 Sep 2009 Location: 12194 Points: 2242 |
Post Options
Thanks(0)
|
Great Information and pictures! I make a motion that this be made a permanent post like Brian Ahart's post on wheel weights.
|
|
DrAllis
Orange Level Access Joined: 12 Sep 2009 Points: 20590 |
Post Options
Thanks(0)
|
Wonderful. So, the WD-45 LPG piston really is the same piston/piston bowl as a D-17 gas engine, whereas the WD-45 gas is the cereal bowl design.
|
|
TedBuiskerN.IL.
Orange Level Joined: 11 Sep 2009 Location: Davis, IL. Points: 1959 |
Post Options
Thanks(0)
|
I would say the 7.25 : 1 WD45 kit would be a later kit, since they are the D17 design.
The parts book shows the 5.0:1 WD piston the same part number as the 7.25:1 WD45, and I would assume, since it is a WD piston design, would be a flat top piston. Great post.
Edited by TedBuiskerN.IL. - 21 Nov 2015 at 8:28am |
|
Most problems can be solved with the proper application of high explosives.
|
|
Michael Crowe
Orange Level Joined: 11 Sep 2009 Location: Kansas City Points: 1722 |
Post Options
Thanks(0)
|
Just to add a bit of light on the 7.25:1 lpg piston, when I rebuilt my 1953 WD45 Distillate it had the 5.0:1 compression ratio pistons, part number 223507. The pictures I took were not the best but my recollection is that they were dished; could be flat tops, but definitely not the recessed bowl like the lpg piston.
The parts books I have shows the 5.0:1 piston, 223507 the same as the 7.2:1 compression piston. I don't know if it is a typo, or if the 7.25:1 was a separate piston than the 223507. My suspicion is that it is not a typo, because the parts books shows the 223507 to also be a WD45 piston, but it does not show the lpg piston to also be a WD piston or even a 226 power unit piston. Another interesting sidenote, when I bought my rebuild kit from ACGO to rebuild my WD45 Distillate, it came with the lpg pistons. |
|
The 14th Annual Exclusive AC Swap Meet will be held in Boonville, MO, March 7-8, 2025. See the club website for details: http://www.moacclub.com/
|
|
JPG AUSTRALIA
Orange Level Joined: 13 Sep 2009 Points: 756 |
Post Options
Thanks(0)
|
WC and WD kero /distallate engines have the cereal bowl pistons,i dont know what their part number is but i,d say if they went on a wd 45 crank you would get 7.25 compression. They sit down a fair way in the 201 cylinder.
|
|
Don(MO)
Orange Level Joined: 12 Sep 2009 Location: Bates City MO. Points: 6862 |
Post Options
Thanks(0)
|
Brian is right this post needs to get put in the new spot for all to find latter on down the road.
|
|
3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep.
|
|
Lonn
Orange Level Joined: 16 Sep 2009 Location: Назарово,Russia Points: 29781 |
Post Options
Thanks(0)
|
|
|
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink I am a Russian Bot |
|
Michael Crowe
Orange Level Joined: 11 Sep 2009 Location: Kansas City Points: 1722 |
Post Options
Thanks(0)
|
I just reposted all these pictures due to the photobucket mess.
|
|
The 14th Annual Exclusive AC Swap Meet will be held in Boonville, MO, March 7-8, 2025. See the club website for details: http://www.moacclub.com/
|
|
WF owner
Orange Level Joined: 12 May 2013 Location: Bombay NY Points: 4674 |
Post Options
Thanks(0)
|
One of my D-17's had the (7.25/1) 229717 pistons, the same as the photo above. Reliant's 7.25/1 pistons are virtually identical.
|
|
Auntwayne
Orange Level Joined: 23 Apr 2011 Location: Edwardsville Il Points: 1589 |
Post Options
Thanks(0)
|
Thanks Michael, I missed it last time.
|
|
Dad always said," If you have one boy, you have a man. If you have two boys, you have two boys". "ALLIS EXPRESS"
|
|
Don(MO)
Orange Level Joined: 12 Sep 2009 Location: Bates City MO. Points: 6862 |
Post Options
Thanks(0)
|
Thanks for bringing the pic's back on here.
|
|
3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep.
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |