Farm Equipment

Print Page | Close Window

8050

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=94404
Printed Date: 08 Sep 2025 at 12:45pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 8050

Posted By: randy
Subject: 8050
Date Posted: 28 Aug 2014 at 9:32am

-------------
CA WD WD45 D17 D17 Diesel 7060 8050 8070

Replies:

Posted By: randy
Date Posted: 28 Aug 2014 at 9:39am

My 8050 makes a noise in the hyd when the 3 point hitch lever is all the way up with the mower is raised. If I move the lever down a little it quits. Sounds like it is against a relief valve. I am going to put a gauge in the system to check stand by pressure later today. Any ideas what it could be?
Thanks, Randy

-------------
CA WD WD45 D17 D17 Diesel 7060 8050 8070

Posted By: DrAllis
Date Posted: 28 Aug 2014 at 4:50pm

Adjust/lengthen the cable to the 3-point valve. It should NOT come 100% to the top....only 99%.

Posted By: randy
Date Posted: 28 Aug 2014 at 9:18pm

Thanks, I will try that. Once again Thanks

-------------
CA WD WD45 D17 D17 Diesel 7060 8050 8070