WC with a new setup
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=94180
Printed Date: 28 Apr 2024 at 7:32pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WC with a new setup
Posted By: BennyLumpkin
Subject: WC with a new setup
Date Posted: 23 Aug 2014 at 6:07pm
Been pulling my WC for almost 4 years. Made the jump to 13.6x38's on farmall flat slat centers, new wheelie bars and weight bars. Tried it today on the toughest track around....granted I was 70 feet short of the next guy, BUT I'm happy. I knew I was underpowered for our sticky clay....its a HP track and I just have a 226 but it made me happy because its balanced perfect now....felt great going down the track. I'll try to post video when I get it off my father in laws phone. Next up....engine build
-------------
Central PA Allis Express
1934 WC254
1945 WF
1945 WC135755
1951 WD68085
1953 WD45-150217
1957 WD45D-230744D
B110
|
Replies:
Posted By: bigcountry48
Date Posted: 23 Aug 2014 at 7:36pm
Is like to see how you got them farmall tires on it. I'm trying to figure out how to get a set of 38s on my pulling wc! Could you post a thread or some pictures of how you did it?
-------------
1950 B, 1952 pulling wd, and 1954 wd45
|
Posted By: BennyLumpkin
Date Posted: 23 Aug 2014 at 7:52pm
Posted By: JM
Date Posted: 03 Sep 2014 at 9:39pm
I almost have my unstyled restored, I am going to try and get to the last pull of year. Not to many stock pulls around here, most call for a 18 high 24 back draw bar. Do you mind if I ask you where you run yours?
I have 14.9-28 firestones, and basically a fresh d17 engine running 1600 rpms.
Until I get some wts I will just run 3500lb. My wc runs 5 mph in first gear, I am hoping with the 3 mph speed limit the extra wheel speed will help once it starts slipping and give me some advantage. Are you running out of power at 3500lb? Thanks, JM
|
Posted By: BennyLumpkin
Date Posted: 06 Sep 2014 at 10:06pm
I'm 24 back from axle center which is the usual around here. I can adjust from 16-20" depending on club rules.
-------------
Central PA Allis Express
1934 WC254
1945 WF
1945 WC135755
1951 WD68085
1953 WD45-150217
1957 WD45D-230744D
B110
|
|