Farm Equipment - 6080 hyd dipstick ?

Print Page | Close Window

6080 hyd dipstick ?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=94146
Printed Date: 08 Sep 2025 at 8:10am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 6080 hyd dipstick ?

Posted By: ctbowles58
Subject: 6080 hyd dipstick ?
Date Posted: 22 Aug 2014 at 5:21pm

on our 6080 the dipstick for the hyd/ rear-end wont fit, it looks like there should be a insert or something to make the hole smaller ,I have the correct dipstick but it is too small, I was looking on AGCO PARTS and it listed part #75127439 with the dipstick but there was no pic. or description of that part, any help would be appreciated. THANKS TOM.

-------------
190XT 2WD45 WF D15 D14 CA BIG10 302 & 303 bailers 77G rake 80R mower 6 plows and alot more

Replies:

Posted By: JIMncMO
Date Posted: 22 Aug 2014 at 8:14pm

In the earlier 6080's the dipstick threaded into the housing. On some of the newer ones they welded a piece of pipe on top of the housing and the dipstick just slid in it. Sound like you may have an early dipstick, and a later model tractor.

Posted By: ctbowles58
Date Posted: 22 Aug 2014 at 9:47pm

JIMncMO wrote:

In the earlier 6080's the dipstick threaded into the housing. On some of the newer ones they welded a piece of pipe on top of the housing and the dipstick just slid in it. Sound like you may have an early dipstick, and a later model tractor.

I have a early model tractor ser #1281 it is a 1981 model, the hole is threaded and so is the dipstick, but the hole in the housing is a lot bigger then the dipstick.

-------------
190XT 2WD45 WF D15 D14 CA BIG10 302 & 303 bailers 77G rake 80R mower 6 plows and alot more

Posted By: DrAllis
Date Posted: 22 Aug 2014 at 10:54pm

Look one up for a 6070 tractor and see what it is. I'm trying to figure out why you are changing a dipstick.........did you lose the original??

Posted By: ctbowles58
Date Posted: 23 Aug 2014 at 7:00am

DrAllis wrote:

Look one up for a 6070 tractor and see what it is. I'm trying to figure out why you are changing a dipstick.........did you lose the original??

when we got the tractor this spring it didn't have a dipstick they just had a "plug" in it and I got one out of a salvage yard, from a 6080 but it wont fit.

-------------
190XT 2WD45 WF D15 D14 CA BIG10 302 & 303 bailers 77G rake 80R mower 6 plows and alot more

Posted By: ctbowles58
Date Posted: 24 Aug 2014 at 12:41pm

bump

-------------
190XT 2WD45 WF D15 D14 CA BIG10 302 & 303 bailers 77G rake 80R mower 6 plows and alot more

Posted By: DrAllis
Date Posted: 24 Aug 2014 at 4:04pm

6070 dipstick is 72094258...............6080 dipstick is 72094231.........

Posted By: G3farms
Date Posted: 29 Aug 2014 at 12:37am

I have one of the very last 6080 to be made and they had the small thread in dip stick. The pto housing broke and I had to buy a new one ($1,500), the new housing has a much larger threaded hole for the dip stick plus two extra holes in the left side. This housing is also interchangeable with one from a White I am thinking a 6000 series.

I think the larger threaded plug is 32 mm

I just put an expandable rubber plug in mine and use the old dip stick to check level. Be extra careful not to drop it into the pto housing.

-------------
Proud owner of one of the very last 6080 tractors, serial no. 7711, yep it is correct!