Construction and other equipment - HD5 front idler (wanted)

Print Page | Close Window

HD5 front idler (wanted)

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=93624
Printed Date: 24 Jul 2025 at 3:34pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: HD5 front idler (wanted)

Posted By: Bergie
Subject: HD5 front idler (wanted)
Date Posted: 10 Aug 2014 at 8:16pm

Has anybody here repaired the center section of an idler? Wondering the best method is to fix these. If you have a decent one for sale, please let me know.

Replies:

Posted By: Coke-in-MN
Date Posted: 12 Aug 2014 at 12:04pm

HD5 and HD6 use the same front idler - you can have them welded up by track shop of everything else is good - bearings - seals - axle shaft.

They use submerged arc welding while unit is in jig to get even weld on wheel

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."

Posted By: gemdozer
Date Posted: 13 Aug 2014 at 11:07am

You should speak on this site to dadsdozer he should still have a good used idler and me am still have some but am to far from you, am near MONTREAL CANADA and am't shipping parts over 60 lbs.

Posted By: Coke-in-MN
Date Posted: 13 Aug 2014 at 12:13pm

In Duluth MN try Northern Engine , can try Northern Tractor In Osseo MN , also Thill Track and Tractor in Eau Claire WI, Kato Track and Welding , Crawler Welding in Mankato MN.

Posted By: ac_sd
Date Posted: 14 Aug 2014 at 12:12am

I've got two good ones. Shipping from San Diego area to MN is the problem.

Posted By: ac_sd
Date Posted: 14 Aug 2014 at 12:14am

John Parks at General Gear is an excellent reasonably priced source for a lot of AC parts.