Garden Tractors - 716 Puller

Print Page | Close Window

716 Puller

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=93485
Printed Date: 08 May 2024 at 10:30am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 716 Puller

Posted By: KevinON
Subject: 716 Puller
Date Posted: 07 Aug 2014 at 9:03pm

I have changed the size of the rear pulley on my son's 716 puller to alter the ground speed. There never was a rear belt guide over the original pulley. It is almost impossible to change gears on this thing. Any ideas to solve this issue?? Thanks.

Replies:

Posted By: farmtoybuilder
Date Posted: 08 Aug 2014 at 6:55am

You can make one out of thin flat strap and bend to pulley diameter and weld mounting tabs to it and fasten to side transmission. Adjust to about 1/8'' clearance around the pulley. Or you can use a few L shaped rods and place in 2-3 spots to do same. Make sure it has top belt stop-guide on also. Rods would wok best for puller if your changing diameter of rear one from time to time.

-------------
5 different TT-10's,5 TT-18's Terra Tigers,B-10,2 B-207's,B-110,2 B-112's,HB-112,B-210,B-212,HB212,2 Scamp's & Homilite T-10. Still hunting NICE HB-112 & anything Terra Tiger & Trailers for them.

Posted By: KevinON
Date Posted: 08 Aug 2014 at 11:56am

Thanks, farmtoybuilder! I was considering that.