Farm Equipment - wd wd45 steering shaft

Print Page | Close Window

wd wd45 steering shaft

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=92290
Printed Date: 23 Aug 2025 at 11:45pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: wd wd45 steering shaft

Posted By: HudCo
Subject: wd wd45 steering shaft
Date Posted: 11 Jul 2014 at 8:58pm

what is the best way to repair the steering shaft bushing on the bracket by the clutch housing thanks we also had a great 4th of july show at are place agian this year

Replies:

Posted By: Rltool
Date Posted: 12 Jul 2014 at 10:10am

I would bore it out & put a brass bushing in it.
Ray W.

Posted By: SC Dan K.
Date Posted: 12 Jul 2014 at 4:53pm

The brass bushing in the throttle ?

The bronze bushing in the throttle quadrant wll work to repair this. If it is really worn you might not have to drill it out. I flipped my stearing shaft end over end to get an unworn surface. You will only have to drill one hole for the U-joint.

Posted By: Rick
Date Posted: 12 Jul 2014 at 5:01pm

Dan...He's talking about the steering shaft bushing in the piece on top of the frame rail, I think. Rick