Construction and other equipment - Should i try to save the bushings on a h4 roller

Print Page | Close Window

Should i try to save the bushings on a h4 roller

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=91489
Printed Date: 15 May 2024 at 7:05pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Should i try to save the bushings on a h4 roller

Posted By: pinball
Subject: Should i try to save the bushings on a h4 roller
Date Posted: 24 Jun 2014 at 6:32am

I took this egg shaped roller off my allis h4 crawler/loader. The bushings and seals are pretty nice. Since I will trash the roller should I try to remove the bushings. didn't know if they were hard parts to find. and if so how do I remove them without damaging them. thanks norm

Replies:

Posted By: Andrew_D
Date Posted: 24 Jun 2014 at 11:45am

I would try to save what I could, but that's me being cheap (and you're dealing with hard to find parts for AC equip!)

Andrew

P.S. Got any pics of this egg shaped roller??? How egg shaped are we talking here? Could it be welded up and machined back to spec?

Posted By: pinball
Date Posted: 29 Jun 2014 at 6:29am

Its pretty bad. don't know how to put a photo on here. thanks norm

Posted By: Andrew_D
Date Posted: 29 Jun 2014 at 8:06am

If you want, you can email me the pic and I'll post it for you. Click on my name to the left, select "Member Profile" and scroll down until you see my email address.

Andrew