Crawler Wrench??
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=90575
Printed Date: 01 Jul 2025 at 8:20am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Crawler Wrench??
Posted By: Alberta Phil
Subject: Crawler Wrench??
Date Posted: 04 Jun 2014 at 11:48pm
I got this wrench in a lot of Allis parts lately. There are traces of what seems to be Persian orange paint left and I was wondering if it was for an Allis Crawler? It measures 5 3/8" across the flats 
|
Replies:
Posted By: AusHD6
Date Posted: 05 Jun 2014 at 4:37am
| This big ring spanner fits the sprocket lock nut on an Allis Chalmers HD6 which off the top of my head has to be torqued up to 2100ft/pnds |
Posted By: AusHD6
Date Posted: 05 Jun 2014 at 4:43am
| Wouldn't be ale to get it over the sprocket shaft with that handle welded to it though??? |
Posted By: Alberta Phil
Date Posted: 05 Jun 2014 at 10:01am
|
The handle looks like it was factory made as part of the wrench. It doesn't look like a later addition. It's certainly won't fit anything on my Allis wheel tractors!!LOL |
Posted By: Ray54
Date Posted: 05 Jun 2014 at 10:05pm
|
I don't know the nut size is on the old AC offset discs with the oil bath bearings inside the axle tubes.But the old IH and JD discs I am more familiar with would use a wrench like this. I know were there is a disc measure but it will not happen for a few days as I am committed to other things for a few days. Ray |
Posted By: michale34
Date Posted: 06 Jun 2014 at 8:16am
| I wonder if that is the wrench for the nut that holds the cylinder on a 6g on the nut for the dump cylinder. |
Posted By: michale34
Date Posted: 06 Jun 2014 at 8:20am
|
michale34 wrote: