Farm Equipment - Exhaust manifold on an E combine?

Print Page | Close Window

Exhaust manifold on an E combine?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=8878
Printed Date: 17 Jun 2024 at 1:35am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Exhaust manifold on an E combine?

Posted By: KurtDE
Subject: Exhaust manifold on an E combine?
Date Posted: 02 Mar 2010 at 7:06pm

Is the exhaust manifold on the E the same as the 170 gas manifold? I am looking at the E motor to replace my 170 and the 170 needs an exhaust manifold. Kurt

Replies:

Posted By: DrAllis
Date Posted: 02 Mar 2010 at 9:00pm

It'll work....good luck getting that 90 degree elbow unthreaded from it and installing the 170 pipe.

Posted By: KurtDE
Date Posted: 03 Mar 2010 at 4:42am

Thanks for the info Dr Allis.

Posted By: wheelbilly
Date Posted: 03 Mar 2010 at 10:23am

I used a hack saw to cut the elbow off flush with the manifold and then used a dremel tool with cutting disk to split the part of the elbow still inside. Used a chisel to force in a bit and then screwed it out.

Posted By: Nathan (SD)
Date Posted: 03 Mar 2010 at 10:44am

I did the same a Wheelbilly.