lift crane
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=88695
Printed Date: 30 May 2025 at 4:25am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: lift crane
Posted By: BearHollowBob
Subject: lift crane
Date Posted: 27 Apr 2014 at 3:12pm
| Could some one resend the specs,deminsions and picture of the lift crane I saw here mounths ago for WD and D series tractors? |
Replies:
Posted By: RickM(MO)
Date Posted: 27 Apr 2014 at 3:29pm
Bob, Hope this is what you are looking for. RickM  uploads/298/IMG_3148.JPG" rel="nofollow">uploads/298/IMG_3148.JPG 
------------- Missouri Allis Chalmers Club Member; 1954 WD45 (NF), 611LTD & 811GT Lawn Tractors |
Posted By: BearHollowBob
Date Posted: 27 Apr 2014 at 4:37pm
| This is what I needed. Thanks is the channel iron shown in this 4", or 3" I can't read the fine print in the drawings? |
Posted By: RickM(MO)
Date Posted: 27 Apr 2014 at 4:48pm
Bob, 4" channel. I forgot to mention that the one I built (in the pictures) is not exactly like the factory version which is what is shown in the Parts Manual drawing. We made some changes to make it easier for us to fabricate. So some of the parts and materials are different. Here is a better copy of Material List: ------------- Missouri Allis Chalmers Club Member; 1954 WD45 (NF), 611LTD & 811GT Lawn Tractors |
Posted By: shameless (ne)
Date Posted: 28 Sep 2016 at 10:33pm
| dang it don't lift very high! |
Posted By: Dan73
Date Posted: 29 Sep 2016 at 6:53am
| Well to move stuff you don't need it in the clouds.... |