dyno
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=87678
Printed Date: 13 May 2024 at 5:01pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: dyno
Posted By: 200 allis
Subject: dyno
Date Posted: 07 Apr 2014 at 7:43pm
Replies:
Posted By: 200 allis
Date Posted: 07 Apr 2014 at 7:48pm
|
Does anyone know how hp a allis 200 pto shaft will take. And would dyno the tractor work to brake in motor.
|
Posted By: DougG
Date Posted: 08 Apr 2014 at 1:37am
|
It may, but im afraid it would be hard keeping the dyno cool for an extended time
|
Posted By: pohlman249
Date Posted: 08 Apr 2014 at 5:36am
|
Stock 1000 or 540 pto? 1000 I'd trust to 140 hp range 540 I'd trust to the 100 hp range. A lot of dynos around hear are the m&w brand with water cooling and its one of the better ways to start a brake in period. But they are getting hard to find parts for a big mixer mill or chopper works good too
|
Posted By: patrickmull
Date Posted: 08 Apr 2014 at 5:57am
|
My AW is water cooled it came from the local IH they used it to break in tractors
|
Posted By: 200 allis
Date Posted: 08 Apr 2014 at 7:48am
|
Think a grinder mixer work. Thing is I have a 390 head on pump and big injectors with a hx35 can I even run it in long for break in.
|
Posted By: injpumpEd
Date Posted: 08 Apr 2014 at 7:54am
Heck, I plow and pick corn for fun with my 210 puller with stroked crank, .450 h & r and big injectors. Sometimes plowing mine will get the water up to 200*, so I found that slowing it down from 2200 to 1800 rpm, it worked a lot better, and stayed cooler. Pulling a 5-16 plow about 10" deep. 6mph.
-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
Posted By: 200 allis
Date Posted: 08 Apr 2014 at 8:04am
|
Ok thanks just trying to get ready for pulls. Hoping rods come back soon from heat treating
|
Posted By: WildBill
Date Posted: 08 Apr 2014 at 11:02am
Borrow a 6 inch water pump . Nice steady load you can move throttle around with
-------------
Allis fan for life ! B,C,2-WC'S,WD45G,D19G,190xt ,LLSS 8010, terra tiger refurbished
|
|