WD M&W pistons for sale
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=86121
Printed Date: 21 May 2024 at 7:26am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WD M&W pistons for sale
Posted By: Randy(Mo)
Subject: WD M&W pistons for sale
Date Posted: 09 Mar 2014 at 10:12pm
|
I have a WD block with a set of M&W pistons in it, just took the head off, it ran great but had a little extra knock in the bottom end. I am looking to sell complete block with pistons in it. What is it worth, I dont know really what a fair price would be and if anyone is intersted. If I cant get a fair price for them I am putting the pistons and sleeves in a tractor that needs overhauled. Thanks ------------- Mo Allis Club member |
Replies:
Posted By: Big Orange
Date Posted: 10 Mar 2014 at 12:01am
| Did the motor have A WD or WD45 crankshaft in it? |
Posted By: Randy(Mo)
Date Posted: 10 Mar 2014 at 7:49am
|
Cant honestly answer that still complete. Im was told it was a WD crank. All according to what someone is interested in I would pull it apart to check. ------------- Mo Allis Club member |
Posted By: wi50
Date Posted: 10 Mar 2014 at 1:08pm
|
The compression height of those pistons is right near 2.94". Meaning that's the distance from the center of the wrist pin to the top of the piston. Your deck height of the block is 12.625", rod length center to center is 7.5". Look at the piston tops. if you see the arrow cast in them, they are not trimmed off. With a 4.5" stroke crank they would be sticking up out the top of the sleeve. With a 4" stroke crank you would be about .185" down in the bore yet. ------------- "see what happens when you have no practical experience doing something...... you end up playing with calculators and looking stupid on the internet" |
Posted By: Randy(Mo)
Date Posted: 10 Mar 2014 at 4:25pm
|
Has to be a WD crank, not trimmed and slightly below the top of the sleeve. Thanks ------------- Mo Allis Club member |
Posted By: Free37
Date Posted: 04 Jun 2014 at 4:49pm
| do you still have engine? |
Posted By: JayIN
Date Posted: 11 Jun 2014 at 5:13am
|
Are they standard 4" bore? ------------- sometimes I walk out to my shop and look around and think "Who's the idiot that owns this place?" |
Posted By: DrAllis
Date Posted: 11 Jun 2014 at 6:46am
| M & W pistons have always been 4 1/8" bore on an A-C. |
Posted By: Randy(Mo)
Date Posted: 13 Jun 2014 at 1:31pm
|
The Dr is right , they are 4 1/8 ------------- Mo Allis Club member |
Posted By: JayIN
Date Posted: 20 Jun 2014 at 5:22pm
|
I would like to buy pistons, rods, sleeves if you still.have them. Sorry for the slow reply. Had a death in the family. Maybe block too. ------------- sometimes I walk out to my shop and look around and think "Who's the idiot that owns this place?" |
Posted By: Randy(Mo)
Date Posted: 23 Jun 2014 at 8:21am
|
Jay call me about the pistons. Thanks Randy 573-690-3033 ------------- Mo Allis Club member |
Posted By: JayIN
Date Posted: 23 Jun 2014 at 9:16pm
|
I will try to call tuesday. ------------- sometimes I walk out to my shop and look around and think "Who's the idiot that owns this place?" |
Posted By: Randy(Mo)
Date Posted: 26 Jun 2014 at 11:21pm
 ------------- Mo Allis Club member |
Posted By: WF owner
Date Posted: 31 Aug 2014 at 7:42pm
| Did you ever sell the pistons/sleeves? |
Posted By: Randy(Mo)
Date Posted: 10 Sep 2014 at 9:12pm
|
Yes still have the pistons and sleeves ------------- Mo Allis Club member |