Construction and other equipment - Ford 4500 Backhoe Manual

Print Page | Close Window

Ford 4500 Backhoe Manual

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=84563
Printed Date: 03 Jun 2024 at 5:14am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Ford 4500 Backhoe Manual

Posted By: Scott(SC)
Subject: Ford 4500 Backhoe Manual
Date Posted: 09 Feb 2014 at 7:31am

Where could I get a manual for the backhoe I just bought?

Replies:

Posted By: JoeM(GA)
Date Posted: 09 Feb 2014 at 8:13am

Scott, those could be very pricey from Ford if even till in print. Check with your dealer and ask.
Worst part is that Ford treated that as three pieces, the base 4000 series tractor, the loader (a 740 series I believe) and the the hoe (13' 750 series,14' 753 series, or 15' 755 series)

another route could be through Jensales, they offer tons of re-prints of manuals

Joe

-------------
Allis Express North Georgia
41 WC,48 UC Cane,7-G's,
Ford 345C TLB

Posted By: Yooper Rod
Date Posted: 09 Feb 2014 at 11:10am

I got the manuals for my AC 715 backhoe from Jensales. I got the Operators Manual, Service Manual, and the Parts Manual. My only dislike is that some of the smaller diagrams are slightly fuzzy like poor copies sometimes are, but they are still useful to me.

Posted By: JohnCO
Date Posted: 09 Feb 2014 at 7:19pm

You might check on ebay and amazon as I often find OEM manuals for stuff on there at reasonable prices. Good luck.

-------------
"If at first you don't succeed, get a bigger hammer"
Allis Express participant

Posted By: JoeB
Date Posted: 17 Feb 2014 at 10:31pm

Scott (SC)

If U don't find one, got one in the litterature box, I used to own one and the guy that bought it never came back fo r the manuals ( two I think)

Bump!

Posted By: Scott(SC)
Date Posted: 17 Mar 2014 at 3:28pm

I tried several "Free Downloads" but they weren't free and my virus protection didn't like them very much. LOL! JoeB, how much do you want for one?

Posted By: Scott(SC)
Date Posted: 21 Mar 2014 at 7:21pm

I just blew a very hard to get to hose going from the valve body to the boom. I got it off, but it was fun. Are there special wrenches or something to get in there with?