HD11E blade cutting edge
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=81192
Printed Date: 21 May 2025 at 1:06pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: HD11E blade cutting edge
Posted By: Gargoyle
Subject: HD11E blade cutting edge
Date Posted: 02 Dec 2013 at 6:28pm
|
I need a new cutting edge, or at least the corners for my HD11E straight blade. Any suggestions? |
Replies:
Posted By: Coke-in-MN
Date Posted: 03 Dec 2013 at 10:09am
|
dozer cutting edges and end bits - enter into google or your search engine - most construction suppliers of other machines can order also.
https://www.google.com/search?q=Machine+Cutting+edges+and+end+bits+in+MO#q=dozer+cutting+edges+and+end+bits" rel="nofollow - https://www.google.com/search?q=Machine+Cutting+edges+and+end+bits+in+MO#q=dozer+cutting+edges+and+end+bits ------------- Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something. "Challenges are what make life interesting; overcoming them is what makes life meaningful." |
Posted By: Lazyts
Date Posted: 03 Dec 2013 at 11:13am
|
I've bought corner bits for HD11 from both Minnpar and local Case Construction dealer in past year- similar pricing, identical product- bits from ESCO. About $150 per corner for 1", $200 for heavy bits. I can get you part numbers if you need 'em. |
Posted By: Gargoyle
Date Posted: 01 Mar 2014 at 11:00pm
| Sure. If you have the part numbers that would save me time hunting them down |
Posted By: Lazyts
Date Posted: 04 Mar 2014 at 8:35am
|
70691684- straight bits 70694289- LH (for angle dozer, also fits straight dozer) 70694290- RH |
Posted By: Lazyts
Date Posted: 05 Mar 2014 at 8:31am
This is what the angle bits look like. Some guys put them on the straight dozer for rooting- some even put longer ones on. |
Posted By: DMiller
Date Posted: 05 Mar 2014 at 12:54pm
| Nice pile of 'Spares' you have there! |
Posted By: Lazyts
Date Posted: 05 Mar 2014 at 5:48pm
I'm collecting for my next project... Keeping my eye out for a good 11-B with bad undercarriage so I can use my pile. |
Posted By: CAL(KS)
Date Posted: 05 Mar 2014 at 9:08pm
how hard you gonna use it? you could do this. 5 lbs rod each side and some cutting edge    ------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20 Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15 |
Posted By: Gargoyle
Date Posted: 08 Mar 2014 at 1:12pm
|
Lazyts.. Did you see this 11-B? http://springfield.craigslist.org/hvo/4274747611.html I checked this one out 2x in person.. The motor was froze up when rain came down the exhaust. Owner says it's free now. ?? Many of the rollers are in very good shape. The left rails are worn badly. The sprockets are pretty worn. Many pads are loose |