Construction and other equipment

Print Page | Close Window

Allis Chalmers K

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=80516
Printed Date: 29 Jun 2025 at 1:59pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Allis Chalmers K

Posted By: gvoerm
Subject: Allis Chalmers K
Date Posted: 19 Nov 2013 at 11:40am

Does anyone have a bronze throwout bearing/collar for the hand actuated Main clutch on an allis chalmers K? Or know of a source for these? If not is there interest if they are reproduced?

Grant

Replies:

Posted By: everett048
Date Posted: 19 Nov 2013 at 1:05pm

I think power units with the same motor have that through out bearing or try Norm Meinert he may be able to help clutch must have been disengaged and running for a long time to wear it out.

Posted By: TramwayGuy
Date Posted: 19 Nov 2013 at 4:21pm

Parts should be available. It is most likely either a Twin Disc or Rockford Clutch. Some Rockford clutch parts are difficult to find. But it would be same as industrial clutch used on many OEM power units (most likely).

Need more information. Flat flywheel? Bolt circle of the drive ring? Is there a plate with clutch information on it.

Posted By: everett048
Date Posted: 20 Nov 2013 at 1:36am

No drive ring on K crawlers clutch is mounted on to first motion shaft with teeth around the out side of the plate that engage the toothed flywheel.Drive plate is semi floating untill clutch is engaged to clamp it up.It is clamped between two heavy cast iron plates.

Posted By: Norm Meinert
Date Posted: 20 Nov 2013 at 10:17pm

I have one for the k. the power unit is different size. call 815-865-5372

Norm