Farm Equipment - Zenith Carb Parts

Print Page | Close Window

Zenith Carb Parts

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=7990
Printed Date: 30 Oct 2025 at 8:36pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Zenith Carb Parts

Posted By: Ken in Texas
Subject: Zenith Carb Parts
Date Posted: 11 Feb 2010 at 10:48pm

Who carries new or good used jets for AC B/C/CA Zenith Carbs? Sticking pieces of different size wire in ones that sombody drilled out works. Sometimes you just have to do watcha gotta do to tune one.

Replies:

Posted By: mark-east-tn
Date Posted: 11 Feb 2010 at 10:51pm

Stiners tractor parts.com is a good place or Valu Built tractor parts.com both are good place for carb kits.

Posted By: GlenninPA
Date Posted: 12 Feb 2010 at 6:19am

call Norm Steinman

Posted By: Ken in Texas
Date Posted: 12 Feb 2010 at 10:02am

Carb Kits are no problem. What I am looking for doesn't come in ordinary carb overhaul kits. I have quite a few rusty old Zenith Cores with damaged or missing jets and venturies. If I could find a source of specific size jets and venturies I could restore these old Zeniths back to like new.

Posted By: GlenninPA
Date Posted: 12 Feb 2010 at 11:53am

Ken,

Last time I talked to Norm, he had jets.

Glenn

PS I have some OLD NOS Zenith kits for the B with the jets, etc in them, but I'm not selling them at this time...

Posted By: ALinIL
Date Posted: 12 Feb 2010 at 12:32pm

Ken - Here is a site that has a listing of just about every carb known to man.

http://www.thecarburetorshop.com/Tractorkits.htm - http://www.thecarburetorshop.com/Tractorkits.htm

Also here is a site with repair manual for both the Marvel and the Zenith.

http://www.antiquefarming.com/PDF/carburetor.pdf - http://www.antiquefarming.com/PDF/carburetor.pdf

Hope this might help if you haven't done a carb before. - AL

Posted By: Allen Dilg
Date Posted: 12 Feb 2010 at 8:27pm

Hello Ken Have you thought about adding an external metering needle assy??? Also try McDonald carb & ignition 706 367 4179 very knowledgeable Allen