H-3 radiator
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=79047
Printed Date: 29 May 2025 at 3:09am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: H-3 radiator
Posted By: tom38
Subject: H-3 radiator
Date Posted: 22 Oct 2013 at 6:45pm
|
could anyone out there tell me if a D14 tractor radiator will interchange with a H-3 dozer, or does anyone have a good radiator for sale. thanks in advance tom
|
Replies:
Posted By: MNLonnie
Date Posted: 22 Oct 2013 at 7:17pm
The H3 is based on the D15, not the D14, but I'm not sure what parts interchange. Someone should know or give us some dimensions and we can compare.
-------------
Waukesha B, B, IB, G, styled WF, D15, 615 backhoe, 2-Oliver OC3's, 4 Ford Model T's, 3 Model A Fords, AV8 Coupe, AV8 Roadster, 1933 Ford Wrecker
|
Posted By: DiyDave
Date Posted: 22 Oct 2013 at 7:39pm
|
I think this question was on here earlier this year. I measured my D-15, and it fit, IIRC.
|
Posted By: tom38
Date Posted: 22 Oct 2013 at 8:48pm
|
I said the d-14 because when I too my rad. out because it leaked like a sieve on the top front of the tank is marked in yellow crayon, like a junk yard uses. A C-D14 SO I assumed it was out of a d14 but they might have made a mistake and marked it wrong. that is why I'm asking so if I have to order a new one I'll know it will fit. tom
|
Posted By: tom38
Date Posted: 22 Oct 2013 at 9:17pm
|
one more thing the radiator fit in with no apparent modification done to it. It measures 19&one eighth wide by 23&three fourths high to the top of the fill spout. tom
|
Posted By: RichinWis
Date Posted: 23 Oct 2013 at 3:16am
|
The difference between a tractor radiator and a dozer one is the length of the fan shroud on the back of the radiator the tractor one is longer
|
Posted By: DrAllis
Date Posted: 23 Oct 2013 at 6:25am
|
So, if you had a D15 gas tractor radiator (not a D14) you could pretty easily trim down the shroud depth to fit. There's no way a D14 radiator fits an H-3......has to be based from a D15.
|
Posted By: tom38
Date Posted: 23 Oct 2013 at 8:05am
|
thanks a lot for the information that helps a bunch because this radiator has the shroud trimmed down thanks again tom
|
Posted By: RichinWis
Date Posted: 24 Oct 2013 at 5:44pm
|
Yes it would be a D15 radiator not a D14, the 14 is way too small
|
|