1500 Min-Til
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=7676
Printed Date: 03 Nov 2025 at 9:26pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 1500 Min-Til
Posted By: orangereborn
Subject: 1500 Min-Til
Date Posted: 05 Feb 2010 at 5:53pm
I picked up a 11 shank 1500 Min-Til that needs a little TLC. Can someone give measurements/comparison for the hole size in the hanger/support and the pins on the bearing carrier/hsg. Fab shop says he can make them look like new, but wants to know what new was. Picture shows what exists now. Thanks....Dale
|
Replies:
Posted By: Skyhighballoon(MO)
Date Posted: 05 Feb 2010 at 6:02pm
|
Dale - oh what a tease you are with that D21 barely visible in the background!!!!! Mike
------------- 1981 Gleaner F2 Corn Plus w 13' flex 1968 Gleaner EIII w 10' & 330 1969 180 gas 1965 D17 S-IV gas 1963 D17 S-III gas 1956 WD45 gas NF PS 1956 All-Crop 66 Big Bin 303 wire baler, 716H, 712H mowers |
Posted By: orangereborn
Date Posted: 05 Feb 2010 at 8:46pm
|
Oh no. Darrell (WA)-don't look. :) |
Posted By: Kurzy
Date Posted: 06 Feb 2010 at 7:08am
|
Dale,
I would'nt get excited with that hole. Most had room to move around a bit. I don't think they were tight from factory.
Kurzy
|
Posted By: SCPAAndy
Date Posted: 06 Feb 2010 at 6:34pm
| dale, they were like you pictured from factory. we have a mounted tool bar on the rear of ours which has oversized danish tines and a spring loaded buster bar. We run the the widest and most aggressive points avaiable on our chisel shanks for more soil disturbance. The one thing we added to our was an additional spring hanger and bearing in the middle of our center disc gang. Depending on you soils we had trouble with our center gang breaking bc of the lack of support. |