Print Page | Close Window

Bearing information for WD45

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=7188
Printed Date: 29 Jul 2025 at 8:51am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Bearing information for WD45
Posted By: kollmangr
Subject: Bearing information for WD45
Date Posted: 26 Jan 2010 at 12:45am
I am rebuilding a WD45 and am looking for any reference material that will give me bearing information.  Specifically, I need the correct bearing numbers for the center and rear bearings on the Main Clutch shaft.  I have the I&T manual plus a couple of other manuals but none of them give me any part numbers.  They all just say contact your Allis Chalmers dealer.  Also, I can't find any numbers on the bearing themselves as I would have expected.  Is there any online source that gives exploded views with bearing numbers.

Thanks in advance for any help.



Replies:
Posted By: Don(MO)
Date Posted: 26 Jan 2010 at 5:38am
Try AGCO's parts book on line, Here's the link.
http://www.agcopartsbooks.com/EpsilonWeb/book.aspx?book=agco/79001544 - http://www.agcopartsbooks.com/EpsilonWeb/book.aspx?book=agco/79001544
Hope this helps. Don


-------------
3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep.



Posted By: Dave H
Date Posted: 26 Jan 2010 at 7:13am
I always get the numbders off the old bearings nad then they are overnighted in from the local bearing supplier.  Just a thought


Posted By: Dave(inMA)
Date Posted: 26 Jan 2010 at 7:27am
I take the old bearings to my local bearing shop. They grab the measurements and go from there. Very helpful when the numbers on the old ones are playing hard to find!

-------------
WC, CA, D14, WD45


Posted By: kollmangr
Date Posted: 26 Jan 2010 at 8:54am
Don,
   Thanks for the info.  The Agco site is just what I needed.
Gordon


Posted By: norm [ind]
Date Posted: 26 Jan 2010 at 7:38pm
  call with parts numbers  can identify  1-574-342-4545  we hava book for it



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net