Farm Equipment - need gaskets for 45

Print Page | Close Window

need gaskets for 45

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=69306
Printed Date: 07 Sep 2025 at 4:07pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: need gaskets for 45

Posted By: orangeman Ia
Subject: need gaskets for 45
Date Posted: 25 Apr 2013 at 8:03pm

I need a cork gasket for the belt pulley , final drive gaskets, andgasket kits for the two lift cylinders. Thank you.

Replies:

Posted By: j.w.freck
Date Posted: 25 Apr 2013 at 9:31pm

ck.with jim danforth at OK TRACTOR in mounds oklahoma,great man to deal with.....

Posted By: CTuckerNWIL
Date Posted: 25 Apr 2013 at 9:32pm

Lift cylinders don't have a gasket. They have a chevron packing which can be replaced if you disassemble the cylinder. They can also be tightened up if there is any adjustment left. They are available cheap from places like Motion industries.
Some of the venders on here will have the Belt Pulley gasket and maybe the finals too????
You can buy cork from NAPA and such if you would want to cut your own gaskets. An exacto knife would do the job well.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF