Pulling Forum - WC rear RC gear swap.

Print Page | Close Window

WC rear RC gear swap.

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=68735
Printed Date: 11 Jun 2024 at 1:47am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WC rear RC gear swap.

Posted By: Fields
Subject: WC rear RC gear swap.
Date Posted: 15 Apr 2013 at 8:15am

I have a question .. My WC has the rear end cut out lever, so you could lift the cultivator with the tractor stoped. The RC doesn't have this option. So if I have the the missing rear pinion bearing instaled in the RC third member will it be strong enough to handle the power or do I need to find a wc rear member to put the RC gears into.

Thanks for the Info and response.

Replies:

Posted By: mattb
Date Posted: 15 Apr 2013 at 9:45am

use wc carrier rc only has two spider gears and will break seen it happen with a stock 226

Posted By: TramwayGuy
Date Posted: 16 Apr 2013 at 1:24am

The WC also has a 'straddle mounted' pinion, which the RC does not have. That means it has bearings on both sides of the gear.

Some WC's (high clearance models) had the same ratio gears as the RC...