Farm Equipment - 226 in D-14 or D-15

Print Page | Close Window

226 in D-14 or D-15

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=6858
Printed Date: 30 Oct 2025 at 7:27pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 226 in D-14 or D-15

Posted By: Zyta
Subject: 226 in D-14 or D-15
Date Posted: 19 Jan 2010 at 9:56pm

Just wondering will a 226 specifically a Gelaner E engine fit in a D-14 or D-15 is it possible? has anyone on the forum tried this what's the issues in doing the conversion... would love to know. Or if its been done would like to see pictures.

You'd think if people are stuffing V8's in these tractors you should be able to install another AC engine in D series.

Thanks, Jim

Replies:

Posted By: Eldon (WA)
Date Posted: 19 Jan 2010 at 10:22pm

Much easier (and cheaper) to just buy a D17. As a bonus you get a better tranny!

-------------
ALLIS EXPRESS!
This year:

Posted By: Zyta
Date Posted: 20 Jan 2010 at 10:54am

Sorry I should have asked if anyone has have ever seen a 226 installed in a CA.

Jim

Posted By: MikeB (SD)
Date Posted: 20 Jan 2010 at 12:59pm

I seen one in a "C" once years ago at Rollag Minnesota. It was either a prototype or a prototype reproduction. I don't think the G226 block is prestressed to carry the front pedistal. There is a picture of what they call a W-BC on page 71 in Swinford's book that shows a WC engine in a C.

Posted By: Zyta
Date Posted: 20 Jan 2010 at 2:55pm

Thanks for the info Mike. Unfortunetly I don't have that book but if they had a WC engine block attached to a C it must be possible with the right adapter plate. Might have to make a few changes with the clutch and fly wheel etc..

Jim