Steering Wheel Auction Find - What Does It Fit?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=67422
Printed Date: 06 Sep 2025 at 5:07pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Steering Wheel Auction Find - What Does It Fit?
Posted By: 70Standard
Subject: Steering Wheel Auction Find - What Does It Fit?
Date Posted: 23 Mar 2013 at 1:49pm
|
Got this at a local consignment auction today. Any idea what it fits? Thanks, Dan      ------------- Roof Palomino (SN 224), Chetech Pug UTV, Three Green Tractors and one Red Tractor. |
Replies:
Posted By: klaus
Date Posted: 23 Mar 2013 at 2:02pm
| Looks alot like the one on my '34 WC. |
Posted By: Fred in Pa
Date Posted: 23 Mar 2013 at 2:12pm
|
WC and if hole is bored out it would work on a U ,UC ,Early A .
You have about a $100.oo steering wheel .Good find .
|
Posted By: 70Standard
Date Posted: 23 Mar 2013 at 2:15pm
I agree, the hub looks similar to the one on my '34 WC, but the rubber covering on the outer ring made me think it was for something newer. My '34 steering wheel is all metal. ------------- Roof Palomino (SN 224), Chetech Pug UTV, Three Green Tractors and one Red Tractor. |
klaus wrote:Posted By: 70Standard
Date Posted: 23 Mar 2013 at 2:19pm
Excellent. Thanks for the info, Fred. Hole does not appear to be bored out. The rubber covering needs replaced, but it appears straight otherwise. It was in the middle of a pallet of other old farm stuff, and I talked the auctioneer into selling it separate. I also got a set of unstyled WC fenders at the same auction. One is very nice, the other is rusted through the sheet metal on the top (must have been sitting upside down for some time), but is otherwise good. Prices were right - wish they had more AC parts there! ------------- Roof Palomino (SN 224), Chetech Pug UTV, Three Green Tractors and one Red Tractor. |
Posted By: David Maddux
Date Posted: 24 Mar 2013 at 6:48am
| 7/8" shaft, WC; 1" shaft U, UC, A |
Posted By: Luke R.
Date Posted: 24 Mar 2013 at 7:14am
|
Looks like in the one pic is says f&h in the casting ------------- 4-7030's,170G,220FWA,3-220's,210,D21II,D21I industrial,2-200's,3-190's,175D,2-D19D's,D19G,WD45,WD,CA,2-UCont.,5015FWA,917,B110,Gleaner F |
Posted By: steelwheelAcjim
Date Posted: 24 Mar 2013 at 11:20am
|
It was manufactured by F&H and offered to all kinds of equipment builders including A-C. I have a similar one on an Eagle 6 row crop. I've seen them on Hubers & Silver King's. ------------- Pre-WW2 A-C tractors on steel wheels...because I'm too cheap to buy tires! |
Posted By: 1946WP
Date Posted: 24 Mar 2013 at 9:18pm
| gee fred you ruined for all those that were going offer him $10 for it. |