Farm Equipment - 400 Loader on D14

Print Page | Close Window

400 Loader on D14

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=67071
Printed Date: 06 Sep 2025 at 4:51pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 400 Loader on D14

Posted By: DSeries4
Subject: 400 Loader on D14
Date Posted: 17 Mar 2013 at 10:58am

Flipping through the owners manual of my 400 loader, it shows that spacers are needed to mount the loader frame on a D14. Can anyone tell me how thick these spacers are supposed to be for each side?

Appreciate the help!

-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080

Replies:

Posted By: Gary
Date Posted: 17 Mar 2013 at 11:15am

Hi Myron

I don't have a dimension but I would expect they would be around 3/8" to 1/2" each.

I don't see there exact length being all that critical because the 'Upper and Lower' cross frame braces establish the distance between the two side frames,

and the rear attaching 'U' type clamps around the axle housings can adjust in or out to compensate.

I just installed a 415 on my D-15 last summer.

Gary