Allis wrench
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=66952
Printed Date: 06 Sep 2025 at 5:17pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis wrench
Posted By: BearcatnorthMN
Subject: Allis wrench
Date Posted: 15 Mar 2013 at 2:27pm
| A friend of mine who is also an Allis Brother wanted me to see if anyone knew what this wrench is for. It is about 12" long and has a 3/4" 6 pt. on one end. On the other end is a 1" square head on one side and a 3/4" square when you flip it over. On one side of the wrench it says: ALLIS CHALMERS MFG. CO. LA CROSSE WORKS. On the other side is a number: 300755. I tried to upload a pic but it was huge. I will try again. Thanks. |
Replies:
Posted By: jnicol6600
Date Posted: 15 Mar 2013 at 3:01pm
Heres a little better size for ya
|
Posted By: BearcatnorthMN
Date Posted: 15 Mar 2013 at 3:51pm
| lol how did you do that? Thanks good job... |
Posted By: Ted in NE-OH
Date Posted: 15 Mar 2013 at 3:51pm
The big end fits the transmission fill plug on a B, C
------------- CA, WD, C, 3 Bs, 2 Gs, WC, I-400, 914 |
Posted By: BearcatnorthMN
Date Posted: 15 Mar 2013 at 3:54pm
| My friend who owns the wrench does own a C. He will get a kick out knowing that. |
Posted By: CTuckerNWIL
Date Posted: 15 Mar 2013 at 4:02pm
Before posting the picture, preview it and change the width and height by dividing both by something that will give you 600 wide. ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
BearcatnorthMN wrote:Posted By: ctbowles58
Date Posted: 15 Mar 2013 at 4:14pm
|
i think i have a couple of those wrenches, i know i have one. i will have to see if i can find the other one.i had forgot all about them until i seen your post. ------------- 190XT 2WD45 WF D15 D14 CA BIG10 302 & 303 bailers 77G rake 80R mower 6 plows and alot more |
Posted By: BearcatnorthMN
Date Posted: 15 Mar 2013 at 4:29pm
| Thanks Tucker... |
Posted By: Chalmersbob
Date Posted: 15 Mar 2013 at 8:18pm
|
I think if it says La Cross works, it is an implement wrench made in that branch. Bob ------------- 4 B's, 1 C's,3 CA's, 2 G's WD, D14, D15, B-1, B10, B12, 712S, |
Posted By: EPALLIS
Date Posted: 16 Mar 2013 at 11:22pm
|
I have one of those wrenches also. I never tried it on anything associated with a Model "B". Perhaps Bill Long would know? Anyway, the guy I bought mine from said that it fit an A-C plow. I think the A-C plow works was in Lacrosse Wi. My 2 cents on the topic. Hope someone really knows. Going orange is going great!
|
Posted By: Ted J
Date Posted: 17 Mar 2013 at 8:09am
|
They are for the plows. My Grampa worked there until his retirement. I only wish I had asked him a LOT MORE questions about the plant. But I was young then and didn't care about where Grampa worked and tractors at that time meant nothing but work. I'll ask him when I get to heaven.
------------- "Allis-Express" 19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17 |
Posted By: GlenninPA
Date Posted: 17 Mar 2013 at 8:29am
|
If you look in the BC mower Setup and Operation manual, you will find it called out for the sickle guard nuts. ------------- Good judgment comes from experience. Experience comes from bad judgment. From listening comes wisdom and from speaking comes repentance. Wise men learn more from fools than fools from the wise. |
Posted By: jonny2guns4u
Date Posted: 17 Mar 2013 at 9:49am
I have so many things to ask my grandpa. I just hope I live life well enough to meet him in the after life. ------------- Jonny2guns4u "I won't be wronged... I won't be insulted... I won't be layed a hand on... I don't do these things to other people and I require the same from them." -J.B.Books (AKA)John Wayne |