Pulling Forum - D17 Tie Bars Ideas?

Print Page | Close Window

D17 Tie Bars Ideas?

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=65001
Printed Date: 13 May 2024 at 5:58pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D17 Tie Bars Ideas?

Posted By: Peterson
Subject: D17 Tie Bars Ideas?
Date Posted: 11 Feb 2013 at 12:29pm

Need some ideas for a set of tie bars on my d17. I need to get around the brake and clutch pedals. Thats whats holding me up on them. Maybe if id go from the fender mount bolt holes on the axle tube? I need some ideas! Pics would be great.

Thanks for the help
Tyler

-------------
7095-685I at 255hp, 8070-225HP,8050-210Hp,8030 with 155HP,220 with 670T engine with A-pump, 7580, 185 with 140HP, 2-6080's,6070, S4 D17,wd45,CA,st34 agco, S1 D17 with 3500MK2

Replies:

Posted By: KGood
Date Posted: 11 Feb 2013 at 12:55pm

I was thinking of using the two bolt holes on the inside of each final drive. I believe they were for cornpicker or sickle bar brackets. I was also going to try to connect across.

Posted By: Peterson
Date Posted: 11 Feb 2013 at 12:57pm

I would do that but im prolly going to rotate the finals back. So i dont know if that would work or not. But thanks for the ideas!

-------------
7095-685I at 255hp, 8070-225HP,8050-210Hp,8030 with 155HP,220 with 670T engine with A-pump, 7580, 185 with 140HP, 2-6080's,6070, S4 D17,wd45,CA,st34 agco, S1 D17 with 3500MK2