my wc that i pull if this works
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=60433
Printed Date: 12 May 2024 at 12:43am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: my wc that i pull if this works
Posted By: EricSWPA
Subject: my wc that i pull if this works
Date Posted: 23 Nov 2012 at 8:51am
|
Replies:
Posted By: EricSWPA
Date Posted: 23 Nov 2012 at 8:54am
How bout that ive finally been able to post a photo. Guess the new phone is okay after all lol 
|
Posted By: Fields
Date Posted: 23 Nov 2012 at 9:19am
| nice. I like the holes in the front and rear wheels. a little different than most tractors. |
Posted By: EricSWPA
Date Posted: 23 Nov 2012 at 2:10pm
| Thanks the holes were to help get down to 3000lb think i lost a whole 10lbs lol but since i just made it by about the same amount i guess it was worth it lol |
Posted By: cotncrzy
Date Posted: 24 Nov 2012 at 7:15am
|
Eric,
That looks to be one BAD A$$ set up. There are a few around here with WC crossed with WD 45 and D17. They always are a force to be reconed with espically in the light classes. My winter project is to find some 38" rears, and some smaller fronts. A 38" rim with an 8 bolt pattern must be rare. I want to run 15.5 x 38, I am running 16.9 x 26 now, cant apply horsepower in lighter classes. ------------- C, WD45,WD puller, 185, 200, 7060 Red Belly, 7060 Black Belly,8010, and a R52 Gleaner, AND PROUD OF THEM! |
Posted By: EricSWPA
Date Posted: 24 Nov 2012 at 8:36am
|
Yea i think 8 bolt setups are hard to find. I made 6 to 9 bolt adapters out of have inch steel i imagine it could be done for your setup two. I dont know what weights you run but 13.6 38s work good for me from 3000 To 4500 typically occasionally ill run 5500 farm stock |