Print Page | Close Window

What brand of disk is this?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=58822
Printed Date: 06 Sep 2025 at 10:32am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: What brand of disk is this?
Posted By: allischalmerguy
Subject: What brand of disk is this?
Date Posted: 23 Oct 2012 at 11:03pm
It is orange. Is is an AC or New Idea or what?

Here is the ad where I found it...it is not mine.

http://cedarrapids.craigslist.org/grd/3339068758.html" rel="nofollow - click here to see ad

-------------
It is great being a disciple of Jesus! 1950 WD, 1957 D17...retired in Iowa,



Replies:
Posted By: DiyDave
Date Posted: 24 Oct 2012 at 4:26am
Kinda sorta looks johndeerish to me, like an rwa, kba, or something like that.


Posted By: Lonn
Date Posted: 24 Oct 2012 at 5:44am
Looks like a New Idea to me. The hitch and where the hitch bolts up to the rest of the frame and the general shape of the frame. How the frame extends out each rear corner just a bit.
http://www.ebay.com/itm/NEW-IDEA-551-8-10-12-14-16-TANDEM-DISC-HARROW-OPERATORS-MANUAL-/150866211190" rel="nofollow - http://www.ebay.com/itm/NEW-IDEA-551-8-10-12-14-16-TANDEM-DISC-HARROW-OPERATORS-MANUAL-/150866211190


-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot


Posted By: Brian F(IL)
Date Posted: 24 Oct 2012 at 7:22am
It's not an AC.  Looks like Lonn wins the prize.


Posted By: allischalmerguy
Date Posted: 24 Oct 2012 at 9:03am
Lonn,
I had a New Idea sickle mower that was constructed out of big round tube like that, it was built like a tank!...that is why I suggested New Idea.
Pastor Mike

-------------
It is great being a disciple of Jesus! 1950 WD, 1957 D17...retired in Iowa,


Posted By: allischalmerguy
Date Posted: 24 Oct 2012 at 9:05am
Would a WD pull it?

-------------
It is great being a disciple of Jesus! 1950 WD, 1957 D17...retired in Iowa,


Posted By: Gerald J.
Date Posted: 24 Oct 2012 at 10:04am
I think a WD will spin out trying to pull it in good ground with it working hard. I found a 6' disk was about right with my MF-135 with similar capabilities. I took an Oliver 12' disk, and remounted half the gangs as an offset disk and it was heavy enough to penetrate well and made a good load in plowed ground.

Gerald J.


Posted By: Teddy (punchie)
Date Posted: 25 Oct 2012 at 6:28pm
Wd  8 ft. is about it .  10' is just a little too much need a wd45.  But all in how deep and fast you are going. Pitch (angle) you set the blades, and type of soil and conditions (wet dry etc.).

-------------
Ac D-19, a Number of WD's, One WD45, Two 444 balers, Ac plows and etc.


Posted By: allischalmerguy
Date Posted: 25 Oct 2012 at 10:52pm
Thanks guys...that is kind of what I thought. I have an 8 foot dearborn disk I think now, it is 3 pt. I usually pull it in second cause my field is short. It has one gang that has a bent axle. I need to take it off and straighten it and I need to re do it somehow so that it will raise up off the ground farther when I have it all the way up.

-------------
It is great being a disciple of Jesus! 1950 WD, 1957 D17...retired in Iowa,


Posted By: SHAMELESS
Date Posted: 25 Oct 2012 at 10:55pm
think Lonn is right...new idea used alot of pipe on their machinery! and parts of them were painted orange back then


Posted By: houchens
Date Posted: 25 Oct 2012 at 10:59pm
Looks New Idea to me too, guys.

-------------
8050 200 7010 185x2 D17-IV D15IIx2 D14 WD45 Deutz Allis 6260 Gleaner Kx2 Gleaner K2 Diesel 2300 discx2 600 and 333 planters 2 AC wagons several AC plows/chisels Rotobalerx2 Other Misc AC Equipment



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net