Farm Equipment

Print Page | Close Window

toe in

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=58598
Printed Date: 06 Sep 2025 at 10:26am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: toe in

Posted By: Bull
Subject: toe in
Date Posted: 19 Oct 2012 at 11:35pm

Can anyone tell me how much toe in is proper for a CA wide front? It has been too many years since I did this to remember how!

Replies:

Posted By: MNLonnie
Date Posted: 19 Oct 2012 at 11:53pm

I&T book says 1/16". Does not say where it is measured from.

-------------
Waukesha B, B, IB, G, styled WF, D15, 615 backhoe, 2-Oliver OC3's, 4 Ford Model T's, 3 Model A Fords, AV8 Coupe, AV8 Roadster, 1933 Ford Wrecker

Posted By: Gerald J.
Date Posted: 19 Oct 2012 at 11:55pm

Usually measured from the center ribs of the tires, front and back, front to be 1/16" closer.

Gerald J.

Posted By: DrAllis
Date Posted: 20 Oct 2012 at 7:02am

Always measured at front axle height front and rear on the tire.

Posted By: Ted J
Date Posted: 20 Oct 2012 at 7:37am

Measure up from ground to center of axle. That is where you measure from. Better to measure from inside of rim. Tires can bulge. Of course rims can be bent too, but it is a better place to do it from. It is a two man job.

-------------
"Allis-Express"
19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17

Posted By: Bull
Date Posted: 21 Oct 2012 at 5:53pm

Thanks for the info.

Bull