Hydraulic adjustment 0n 55 CA
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=58185
Printed Date: 06 Sep 2025 at 7:58am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Hydraulic adjustment 0n 55 CA
Posted By: Randy H
Subject: Hydraulic adjustment 0n 55 CA
Date Posted: 12 Oct 2012 at 6:41pm
|
I can not get the hydraulics to hold in any position. They are either all the way up or all the way down, if i raise the lever slowly until the arms start to lift then stop, the arms will slowly extend all the way out. If i raise the lever all the way up the arms come up quickly. i am going to try to adjust the control valve tomorrow, just wondering if anyone could give me any advice how to get it to hold in a set position. Thanks. Randy. NC.
|
Replies:
Posted By: Ted in NE-OH
Date Posted: 12 Oct 2012 at 7:38pm
|
Make sure you have it set for "HOLD" mode. There should be a decal on the tractor that shows how or instructions in the operators manual.
------------- CA, WD, C, 3 Bs, 2 Gs, WC, I-400, 914 |
Posted By: CTuckerNWIL
Date Posted: 12 Oct 2012 at 8:14pm
------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |