Chisel Plow size for a 7060
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=57908
Printed Date: 30 Aug 2025 at 6:34am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Chisel Plow size for a 7060
Posted By: Alan (C-IL)
Subject: Chisel Plow size for a 7060
Date Posted: 05 Oct 2012 at 11:14pm
|
Got all the corn out last weekend, did descent at 120 bu/acre. Mom and I were brain storming what we could buy to reduce our tax burden and I thought a chisel plow would be a good addition. I was trying to determine what size I could pull with the 7060 through silty clay soil. My plan was to go with the chisel points rather than sweeps and I've seen anywhere from 4 HP/ft up to 10 HP/ft. Does anyone have some insight they could share or know of any for sale near central illinois? Seems the used chisel plow market isn't big around here. Thanks, Alan
|
Replies:
Posted By: n7gleaner
Date Posted: 06 Oct 2012 at 12:27am
|
If you want an allis or duetz chisel plow 7 shank they pull very hard. if you buy a glencoe or a john deere or Kent chisel plow 9 no problem for a 7060 thats figure with disc on front.
|
Posted By: Lonn
Date Posted: 06 Oct 2012 at 6:50am
I have a 9 shank Allis Min-Til and it' all my 7050 wants and more. I don't have any wheel weights on it but do have duals and I can't quite put it all the way in the ground without spinning.
-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot
|
Posted By: BobHnwO
Date Posted: 06 Oct 2012 at 8:45am
I pull a 6 shank,with 4"twisted shovels,14" deep,also has leveler bar,hard clay,4 Firestone Radials At 10# and get some tire slip,7060PS.
-------------
Why do today what you can put off til tomorrow.
|
Posted By: ACFarmer
Date Posted: 06 Oct 2012 at 1:41pm
I pull a 9 shank Glenco with disks on the front with my 7080. In hard ground it works the tractor good. I have 20.8 radials with cast axle duals and 2 sets of the big wheel weights on each side and a full rack of front weights as well. Doesnt lack hp though.
-------------
Making a living farming with and working on Allis Equipment
|
Posted By: EricPA
Date Posted: 06 Oct 2012 at 3:07pm
back in the early 80's when dad and I were looking the rule of thumb was you needed 10 hp. for every tooth.
-------------
Life is tough,but it's tougher when you're stupid. - John Wayne
|
Posted By: cotncrzy
Date Posted: 07 Oct 2012 at 8:11am
I pull a 15 shank Brilion with my 7060,Run 4th in hard tight clay, 5th in silt loam, with chisel points at 12" deep. Ballast filled tires, wheel weights, 20.8 duals. I ran some the other day to help level some old pasture ground we took in a couple of years ago. I got reminded why we no till now! I bet our fuel bill is cut by 70%! I put almost two tanks of fuel through it in a day. It's nice to get to PLOW and feel the power again.
-------------
C, WD45,WD puller, 185, 200, 7060 Red Belly, 7060 Black Belly,8010, and a R52 Gleaner, AND PROUD OF THEM!
|
|