Farm Equipment - CA Toolbox shroud

Print Page | Close Window

CA Toolbox shroud

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=57802
Printed Date: 06 Sep 2025 at 3:12am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: CA Toolbox shroud

Posted By: bshook78
Subject: CA Toolbox shroud
Date Posted: 03 Oct 2012 at 4:05pm

What is the best way to remove the toolbox on a CA? Do I need to pull the steering wheel off and slide it back? Not sure what to do here. I want to take it off so I can sand and paint it. Thanks.

Replies:

Posted By: TMiller/NC
Date Posted: 03 Oct 2012 at 8:37pm

bshook, you have to remove the steering wheel, remove the clamp on steering tube, inside the tool box at steering gear loosen clamp on steering tube, get battery and battery box out of the way, of course gas tank must be off. Tim

Posted By: bshook78
Date Posted: 03 Oct 2012 at 9:01pm

Thanks Tim. I have already taken off everything but the steering wheel. It looked like that was the only way, but I wasn't sure. Again, thanks for the help.