Farm Equipment - Rebuilding MS TSX 464 carb

Print Page | Close Window

Rebuilding MS TSX 464 carb

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=57686
Printed Date: 29 Aug 2025 at 2:12am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Rebuilding MS TSX 464 carb

Posted By: Ohio WD45
Subject: Rebuilding MS TSX 464 carb
Date Posted: 01 Oct 2012 at 11:37am

I am rebuilding this carb from my WD45. Both the instructions in the rebuild kit and the parts book show small o-rings in places where there were done when I tore the carb apart. Should put the o-rings in like the book shows or leave them out?

Replies:

Posted By: Steve in NJ
Date Posted: 01 Oct 2012 at 2:27pm

Depending on the mfr's rebuiid kit, some o-rings n' parts fit other series carburetors, so you may have a few things left over that you may not use. The best thing to do is go by the mfr's rebuilding sheet and explosion. Sometimes service manuals can make things a little more corn-fusing...

mailto:Steve@B&B" rel="nofollow - Steve@B&B