Farm Equipment - removing throat and header on R62

Print Page | Close Window

removing throat and header on R62

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=57507
Printed Date: 06 Sep 2025 at 9:43am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: removing throat and header on R62

Posted By: BearcatnorthMN
Subject: removing throat and header on R62
Date Posted: 27 Sep 2012 at 6:46am

Replies:

Posted By: BearcatnorthMN
Date Posted: 27 Sep 2012 at 6:47am

does anyone have step by step instructions on how to remove the throat and header on a R62 combine. We sucked up a shovel from a cultivator and broke chains and slats on conveyor to grain compartment.

Posted By: DrAllis
Date Posted: 27 Sep 2012 at 6:56am

You sure don't have to remove the feederhouse (throat) to replace either front or rear feed chains. Removing the header ?? should be a five minute job....

Posted By: BearcatnorthMN
Date Posted: 27 Sep 2012 at 7:13am

was told we have to remove the throat and header in one piece by local dealer. It is the rear chains and slats that need tlc. The ones that go up to the grain bin.

Posted By: BearcatnorthMN
Date Posted: 27 Sep 2012 at 7:19am

I am just helping the guy get his beans out so am a rookie to the service on the combine. Told him I would try to get some info.

Posted By: BearcatnorthMN
Date Posted: 27 Sep 2012 at 7:20am

we are in the grain bin looking down at the chains that are broken and the slats that are bent.

Posted By: DrAllis
Date Posted: 27 Sep 2012 at 7:36am

Open the double screen doors underneath the transmission. Then crawl inside and open the bottom door to the rear feed chain floor to gain access to the chain and slats. Find a guy who isn't over 200 lbs to do this.

Posted By: BearcatnorthMN
Date Posted: 27 Sep 2012 at 8:40pm

Ah Ha will do and thanks Doc.....