IB-QUESTION
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=57015
Printed Date: 06 Sep 2025 at 10:03am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: IB-QUESTION
Posted By: GA-IN-TEXAS
Subject: IB-QUESTION
Date Posted: 17 Sep 2012 at 4:28pm
| What is the best way to get grill shell removed from a IB? will restore this tractor when i get every thing working and repaired, then will tear down to do final restoration. It is a later model IB-3397, the engine seems ok but the rest of tractor, it does need to be restored. had a cycle mower on it but iam not going to put it back. Maybe droping front axle and front brkt. would be easyier than removeing wrap around for now? Ideas appreciated. THANKS |
Replies:
Posted By: steve(ill)
Date Posted: 17 Sep 2012 at 4:32pm
|
I think you will have to remove the wrap around. Dont think the radiator cover will come off. It needs to move forward 4-6 inches to get it off before the radiator comes off. ------------- Like them all, but love the "B"s. |
Posted By: Dave Richards (WV)
Date Posted: 17 Sep 2012 at 4:34pm
| take the axle stablizer loose from the torque tube before you take out the pivot pin in the axle. This will save you a lot of tears later. |
Posted By: dave63
Date Posted: 17 Sep 2012 at 7:27pm
|
A previus owner of my IB cut the bottom of the radiator cover from mine in order to remove the radiator. So I will need to replace mine when i restore it. In your case I would remove the frame. Sometimes taking a little extra time is worth while.------------- The universal answer to all questions is yes, how much do you want to spend? |
Posted By: GA-IN-TEXAS
Date Posted: 18 Sep 2012 at 6:39am
| Thanks guys for info. i have to replace both fenders,think i will wait on grill shell removal at that time, several wrap around bolts will have to be removed at that time to replace fenders. THANKS AGAIN, GARY |
Posted By: GlenninPA
Date Posted: 18 Sep 2012 at 6:54am
|
Congrats on getting an IB Gary. It is a nice little tractor to own. ------------- Good judgment comes from experience. Experience comes from bad judgment. From listening comes wisdom and from speaking comes repentance. Wise men learn more from fools than fools from the wise. |
Posted By: Steve in NJ
Date Posted: 18 Sep 2012 at 7:44am
Front axle needs to be removed first. Then you remove all front mounting bolts. Remove all rear bolts but two for pivots, and drop the wrap around down in front. That's how I dropped mine out and then re-installed my wrap around during the restoration process of my IB. After I devised a plan, it came right out. That was the easy part. Man, that was a bear to do without chippin' any new paint, especially by myself on the re-install! I put the front of the wrap around on a floor jack rolled it under the Tractor (no front axle in it at the time) started a couple rear bolts, and gently lifted the the front of the wrap around with the floor jack. Went right into place. After that episode though, I had to go sit down and have a glass of red wine and relax for a bit! LOL! 
mailto:Steve@B&B" rel="nofollow - Steve@B&B
|